# Dynocard graphing

**URL:** <https://forum.inductiveautomation.com/t/dynocard-graphing/8193>\
**Category:** Ignition\
**Created:** [March 21, 2014, 4:21pm UTC](https://forum.inductiveautomation.com/t/dynocard-graphing/8193 "2014-03-21T16:21:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pjgonzales](https://avatars.discourse-cdn.com/v4/letter/p/59ef9b/32.png) [@pjgonzales](https://forum.inductiveautomation.com/u/pjgonzales)\
**Post date:** [March 21, 2014, 4:21pm UTC](https://forum.inductiveautomation.com/t/dynocard-graphing/8193/1 "2014-03-21T16:21:09Z")

</div>

We currently have an installation of Ignition up and running at a site that will soon be adding a number of Weatherford pump off controllers. We can access the data in the controllers via OPC through a Topserver plugin. I am being asked if we can duplicate dynocard graphs for the controllers in Ignition.

I am not very familiar with dynographs‚ but from what I understand it is a type of circular graph using load and position data from the pump off controller. I am currently looking into the information so I can gain a better understanding.

That being said‚ is there anyone out there currently using Ignition in this manner and‚ if so‚ do you have any tips/recommendations? Thanks in advance for any information.

---

<div class="post-metadata">

**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\
**Post date:** [March 21, 2014, 4:36pm UTC](https://forum.inductiveautomation.com/t/dynocard-graphing/8193/2 "2014-03-21T16:36:43Z")

</div>

we looked at it but didnt think it was something that we could easily do. ended up just using xspoc for dynocard and more detailed information for downhole pumps.