# Easy chart doesnt work in Vision Client Launcher

**URL:** <https://forum.inductiveautomation.com/t/easy-chart-doesnt-work-in-vision-client-launcher/75623>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [June 28, 2023, 7:47am UTC](https://forum.inductiveautomation.com/t/easy-chart-doesnt-work-in-vision-client-launcher/75623 "2023-06-28T07:47:46Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gregor\_Hocevar](https://avatars.discourse-cdn.com/v4/letter/g/a5b964/32.png) [@Gregor\_Hocevar](https://forum.inductiveautomation.com/u/Gregor_Hocevar)\
**Post date:** [June 28, 2023, 7:47am UTC](https://forum.inductiveautomation.com/t/easy-chart-doesnt-work-in-vision-client-launcher/75623/1 "2023-06-28T07:47:46Z")

</div>

Hello.  
I am new user of Ignition SCADA. For learning this scada I am using tutorials from Ignition SCADA university. I have a problem with implementing Easy chart. In ignition Designer everything is working fine but in Vision Client Launcher is not reading TAG.  
Would someone have solution for my problem?

 ![Ignition Designer](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/f/5fca36b8e36419c48774a4dcc13c64ecd832c690.png)  
 ![Ignition Launcher](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/2/d2831d69bd621e932fdb95760b4511d7b87f4f7e.png)

---

<div class="post-metadata">

**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Post date:** [June 28, 2023, 8:00am UTC](https://forum.inductiveautomation.com/t/easy-chart-doesnt-work-in-vision-client-launcher/75623/2 "2023-06-28T08:00:49Z")

</div>

Edit: if that were the case, the client launcher wouldn't work

---

<div class="post-metadata">

**Author:** ![Gregor\_Hocevar](https://avatars.discourse-cdn.com/v4/letter/g/a5b964/32.png) [@Gregor\_Hocevar](https://forum.inductiveautomation.com/u/Gregor_Hocevar)\
**Post date:** [June 28, 2023, 8:04am UTC](https://forum.inductiveautomation.com/t/easy-chart-doesnt-work-in-vision-client-launcher/75623/3 "2023-06-28T08:04:07Z")

</div>

No. Other tags works fine, just Easy chart does not working.

---

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [June 28, 2023, 8:31am UTC](https://forum.inductiveautomation.com/t/easy-chart-doesnt-work-in-vision-client-launcher/75623/4 "2023-06-28T08:31:10Z")

</div>

In Designer, go Project-\>Properties, under Vision/Permissions, enable Tag History, then save

---

<div class="post-metadata">

**Author:** ![Gregor\_Hocevar](https://avatars.discourse-cdn.com/v4/letter/g/a5b964/32.png) [@Gregor\_Hocevar](https://forum.inductiveautomation.com/u/Gregor_Hocevar)\
**Post date:** [June 28, 2023, 8:48am UTC](https://forum.inductiveautomation.com/t/easy-chart-doesnt-work-in-vision-client-launcher/75623/5 "2023-06-28T08:48:27Z")

</div>

Thank you.  
It is working now. I just need to figure out how this chart would work faster.