# Easy Chart no Taking Changes

**URL:** <https://forum.inductiveautomation.com/t/easy-chart-no-taking-changes/117639>\
**Category:** General Discussion\
**Tags:** vision\
**Created:** [October 28, 2026, 1:05pm UTC](https://forum.inductiveautomation.com/t/easy-chart-no-taking-changes/117639 "2026-10-28T13:05:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ilikebeer](https://avatars.discourse-cdn.com/v4/letter/i/eb8c5e/32.png) [@ilikebeer](https://forum.inductiveautomation.com/u/ilikebeer)\
**Post date:** [October 28, 2026, 1:05pm UTC](https://forum.inductiveautomation.com/t/easy-chart-no-taking-changes/117639/1 "2026-10-28T13:05:40Z")

</div>

Have an Easy Chart that has been working for a couple years.

Ignition Platform 8.1

The Chart has 9 Subplots each with their own pen. This is not a template. When i try to edit a subplot for the Upper Range, it takes just fine in Designer. But after i finish and save and commit changes, i most of the time reverts back to what i started with. Occasionally, it will take the changes, but i cannot find what is the "magic" sequence. I have edited the ranges in the Easy Chart Customizer. Also edited in the Chart Configuration "Axes" Dataset. All will look great and appear to save correctly but when i close and re-open the chart, it may, or more likely not have those changes. Any suggestions or ideas?

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [October 28, 2026, 1:14pm UTC](https://forum.inductiveautomation.com/t/easy-chart-no-taking-changes/117639/2 "2026-10-28T13:14:08Z")

</div>

Look for bindings or scripts that are overwriting your changes.

---

<div class="post-metadata">

**Author:** ![ilikebeer](https://avatars.discourse-cdn.com/v4/letter/i/eb8c5e/32.png) [@ilikebeer](https://forum.inductiveautomation.com/u/ilikebeer)\
**Post date:** [October 28, 2026, 2:44pm UTC](https://forum.inductiveautomation.com/t/easy-chart-no-taking-changes/117639/3 "2026-10-28T14:44:57Z")

</div>

Thanks Phil. I found that if i go through every setting Chart Configuration, and the customizer then to the properties and make the changes to all these before saving, its working MOST of the time.