# Easy Chart - Pen Digital Offset **URL:** \ **Category:** Ignition\ **Created:** [February 11, 2011, 9:43pm UTC](https://forum.inductiveautomation.com/t/easy-chart-pen-digital-offset/2633 "2011-02-11T21:43:19Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![cbabb](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cbabb/32/49029_2.png) [@cbabb](https://forum.inductiveautomation.com/u/cbabb)\ **Post date:** [February 11, 2011, 9:43pm UTC](https://forum.inductiveautomation.com/t/easy-chart-pen-digital-offset/2633/1 "2011-02-11T21:43:19Z")
I think this is something overlooked… I have 6 pens in an easy chart, tracking digital states. 3 pens in subplot 1, 3 in subplot 2. If I check the digital offset for each of them, it is applied as if all the pens were all in the same subplot. i.e. each pen is offset by a value of .05 which makes the 1st pen in the second subplot (pen 4) start with a value of .15 rather than starting at 0. As shown in the picture. All pens are a value of zero. The almost top subplot is fine (pens 1-3). The bottom subplot should reset the offset and start at zero again (pens 4-6), IMHO… ![](https://us1.discourse-cdn.com/inductiveautomation/original/1X/ab7d7bca97a44d833603b65ec35918afcc5841d8.PNG) Is this something you guys can take care of? ---
**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\ **Post date:** [March 4, 2011, 1:26am UTC](https://forum.inductiveautomation.com/t/easy-chart-pen-digital-offset/2633/2 "2011-03-04T01:26:38Z")
Oh yeah that is an oversight. Thanks for reporting it, I’ve made a ticket to get it fixed. ---
**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\ **Post date:** [March 16, 2011, 10:22pm UTC](https://forum.inductiveautomation.com/t/easy-chart-pen-digital-offset/2633/3 "2011-03-16T22:22:14Z")
This has been fixed for 7.2.5 ---
**Author:** ![cbabb](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cbabb/32/49029_2.png) [@cbabb](https://forum.inductiveautomation.com/u/cbabb)\ **Post date:** [March 17, 2011, 12:07pm UTC](https://forum.inductiveautomation.com/t/easy-chart-pen-digital-offset/2633/4 "2011-03-17T12:07:06Z")
Thanks Carl… C