# Edge disabled restore, missing edge tag provider

**URL:** <https://forum.inductiveautomation.com/t/edge-disabled-restore-missing-edge-tag-provider/46872>\
**Category:** Ignition Early Access\
**Created:** [May 19, 2021, 6:29am UTC](https://forum.inductiveautomation.com/t/edge-disabled-restore-missing-edge-tag-provider/46872 "2021-05-19T06:29:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tordvd](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/tordvd/32/11525_2.png) [@tordvd](https://forum.inductiveautomation.com/u/tordvd)\
**Post date:** [May 19, 2021, 6:29am UTC](https://forum.inductiveautomation.com/t/edge-disabled-restore-missing-edge-tag-provider/46872/1 "2021-05-19T06:29:13Z")

</div>

Ignition 8.1.3.

It is missing after the disabled restore, see picture below:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/6/062286cf751b84b6ca89d5d917b12024d03c238c.png)

Also, I cannot enable it either as Edge does not have this config:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/8/c847db20c603eede07f073baed7991c771232ae2.png)

How can i enable the “edge” tag provider?  
Edit: I was going to send in a support ticket, bit thought it might be more efficient using the forums 🙂

---

<div class="post-metadata">

**Author:** ![swolnisty](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@swolnisty](https://forum.inductiveautomation.com/u/swolnisty)\
**Post date:** [May 19, 2021, 5:39pm UTC](https://forum.inductiveautomation.com/t/edge-disabled-restore-missing-edge-tag-provider/46872/2 "2021-05-19T17:39:29Z")

</div>

I believe this is a known bug:

> [@\[BUG-1287\] Edge tag provider missing](http://forum.inductiveautomation.com/t/edge-tag-provider-missing/20355/2):
>
> Did you happen to restore a .gwbk (possibly disabled?) We’re currently missing a way to re-enable the tag provider on Edge (whoops). If that’s the case, Support can probably get things straightened out for you - the procedure to re-enable isn’t too complicated, but it’s in a theoretically “dangerous” area where you could break things.

I think you may be able to re-enable it by editing the internal db, if you're comfortable with that. Otherwise, it sounds like you're stuck calling support. 🙂