# Edge Ignition-Gateway Failed to Start **URL:** \ **Category:** Ignition\ **Created:** [October 25, 2023, 8:58pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994 "2023-10-25T20:58:37Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Tyler\_Boyd](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler\_Boyd](https://forum.inductiveautomation.com/u/Tyler_Boyd)\ **Post date:** [October 25, 2023, 8:58pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/1 "2023-10-25T20:58:37Z")
Trying to run Ignition Edge on Raspberry Pi and I keep getting an error when starting the Gateway. Image and Log attached [wrapper.log](https://forum.inductiveautomation.com/uploads/short-url/bqKRVlCbP8jTF1GXXe79aPZ7iGk.log) (42.2 KB) ![RasPi](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/0/60f506437c31afaedcf49ae0cb3cef5c66ef4cdf.jpeg) ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [October 25, 2023, 9:06pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/2 "2023-10-25T21:06:22Z")
Line 18: ```auto java.lang.UnsatisfiedLinkError: /usr/local/ignition/jre-tmp/sqlite-3.41.2.2-243af1b3-f0ce-4c06-99d1-d9686f75d3f4-libsqlitejdbc.so: /usr/local/ignition/jre-tmp/sqlite-3.41.2.2-243af1b3-f0ce-4c06-99d1-d9686f75d3f4-libsqlitejdbc.so: wrong ELF class: ELFCLASS64 (Possible cause: can't load AARCH64 .so on a ARM platform) ``` > (Possible cause: can't load AARCH64 .so on a ARM platform) Wrong Ignition installer for your OS or wrong RPi OS image. ---
**Author:** ![Tyler\_Boyd](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler\_Boyd](https://forum.inductiveautomation.com/u/Tyler_Boyd)\ **Post date:** [October 26, 2023, 12:52pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/3 "2023-10-26T12:52:49Z")
Hi Thanks for helping, I used the standard RPi OS w/ Desktop (32bit) from their website and the Ignition Edge - Linux ARMHF 32-bit zip directly from the Ignition website. I followed the instruction listed in the link bellow. I read on the forum somewhere the java 8 stuff was fixed in Ignition 8.1. In the instruction it's using a RPi 3 running Raspbian with PIXEL I am using a 4B. Not sure what to try next. [Installing Ignition Edge on Raspberry Pi – Inductive Automation Help Center](https://support.inductiveautomation.com/hc/en-us/articles/360047576431-Installing-Ignition-Edge-on-Raspberry-Pi) ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [October 26, 2023, 12:56pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/4 "2023-10-26T12:56:13Z")
I haven't use an RPi 4 yet. Sorry. ---
**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\ **Post date:** [October 26, 2023, 2:07pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/5 "2023-10-26T14:07:00Z")
Can you show the output of the following two commands? ```bash uname -a ``` ```bash cat /usr/local/ignition/lib/install-info.txt ``` ---
**Author:** ![Tyler\_Boyd](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler\_Boyd](https://forum.inductiveautomation.com/u/Tyler_Boyd)\ **Post date:** [October 26, 2023, 3:40pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/6 "2023-10-26T15:40:34Z")
> [@kcollins](#): > > `cat /usr/local/ignition/lib/install-info.txt` Here's what I get! ![sysOSRPi](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/1/217ea1e45cac8728062bac06e6bd844dd8d02fe5.jpeg) ---
**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\ **Post date:** [October 26, 2023, 3:43pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/7 "2023-10-26T15:43:09Z")
Looks like you ended up with the 64-bit Raspberry Pi OS (which you can see via the aarch64 kernel from `uname -a`).. You'll need to use the associated AARCH64 Ignition installation archive, i.e. one of these: ![SCR-20231026-jtzx](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/9/198d32e8847550b004d3129dcd81002aee5223a1.png) ---
**Author:** ![Tyler\_Boyd](https://avatars.discourse-cdn.com/v4/letter/t/35a633/32.png) [@Tyler\_Boyd](https://forum.inductiveautomation.com/u/Tyler_Boyd)\ **Post date:** [October 26, 2023, 8:03pm UTC](https://forum.inductiveautomation.com/t/edge-ignition-gateway-failed-to-start/80994/8 "2023-10-26T20:03:58Z")
Based on what I gathered I was still running 32 bit RPi OS on a 64 bit machine so when I tried to run the 64 bit ignition I was still getting errors and no log was generated. I just went ahead and installed the 64 bit RPi OS and had no issues. Thanks for the help. I got plenty of Linux practice today. ![IMG-4228](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/9/398e648259559f908034d0b02bcfb99d32d7360d.jpeg) ![IMG-4229](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/b/8b592cce3c1587956bd24ab45d0285331b30724c.jpeg)