# Edge on ARM connection to Micrologix

**URL:** <https://forum.inductiveautomation.com/t/edge-on-arm-connection-to-micrologix/12846>\
**Category:** Ignition\
**Created:** [March 27, 2017, 5:22pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm-connection-to-micrologix/12846 "2017-03-27T17:22:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![weertske](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/weertske/32/3353_2.png) [@weertske](https://forum.inductiveautomation.com/u/weertske)\
**Post date:** [March 27, 2017, 5:22pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm-connection-to-micrologix/12846/1 "2017-03-27T17:22:39Z")

</div>

The problem with resetting the Edge license discussed earlier has been patched by using a temporary license.

However, my device connection to a Micrologix is producing bad data. Devices says I am Connected: Protocol: EIP but when I browse a tag with the quick client I get bad data. Using my Ignition work platform running 7.9.1 on Linux, the quick client gives me good data.

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [March 27, 2017, 5:59pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm-connection-to-micrologix/12846/2 "2017-03-27T17:59:08Z")

</div>

I don’t think we ran into that issue in testing. Can you reach out to support so they can determine what the issue is? Thanks!