# Edge on ARM

**URL:** <https://forum.inductiveautomation.com/t/edge-on-arm/12842>\
**Category:** Ignition\
**Created:** [March 26, 2017, 6:53pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm/12842 "2017-03-26T18:53:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![weertske](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/weertske/32/3353_2.png) [@weertske](https://forum.inductiveautomation.com/u/weertske)\
**Post date:** [March 26, 2017, 6:53pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm/12842/1 "2017-03-26T18:53:16Z")

</div>

Testing Edge Panel on a Raspberry Pi3:

Good so far (after I fixed a problem with Java)

However, after the two hour trial has expired, the normal way to reset the trial is not available.

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [March 27, 2017, 3:19pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm/12842/2 "2017-03-27T15:19:48Z")

</div>

We did see something like this where the reset button wasn’t visible in particular browsers. This wasn’t limited to Edge.

What browser are you using?

---

<div class="post-metadata">

**Author:** ![weertske](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/weertske/32/3353_2.png) [@weertske](https://forum.inductiveautomation.com/u/weertske)\
**Post date:** [March 27, 2017, 3:52pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm/12842/3 "2017-03-27T15:52:08Z")

</div>

Chrome on Linux. FYI, I can see the reset button on my connection to my 7.9.1 work platform.

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [March 27, 2017, 4:01pm UTC](https://forum.inductiveautomation.com/t/edge-on-arm/12842/4 "2017-03-27T16:01:47Z")

</div>

Well, that’s not the issue we saw. 😊 I’ll make a ticket to get this fixed.