# Edge Pi Image Duplication

**URL:** <https://forum.inductiveautomation.com/t/edge-pi-image-duplication/111073>\
**Category:** General Discussion\
**Created:** [September 29, 2025, 7:47pm UTC](https://forum.inductiveautomation.com/t/edge-pi-image-duplication/111073 "2025-09-29T19:47:56Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Clancy\_Cavanaugh](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@Clancy\_Cavanaugh](https://forum.inductiveautomation.com/u/Clancy_Cavanaugh)\
**Post date:** [October 1, 2025, 5:10pm UTC](https://forum.inductiveautomation.com/t/edge-pi-image-duplication/111073/8 "2025-10-01T17:10:56Z")

</div>

Not positive, but I think your issue is the uuid. Look for the file .uuid in the Ignition/data folder. If you are duplicating that file then you’ll have issues adding both to the gateway network.

I think you can delete this file on the duplicated gateway and it will generate a new one on startup based on this thread: [GAN - How to reset gateway Id/UUID? - Ignition - Inductive Automation Forum](https://forum.inductiveautomation.com/t/gan-how-to-reset-gateway-id-uuid/95236)

---

_[View the full topic](https://forum.inductiveautomation.com/t/edge-pi-image-duplication/111073)._