# Edit projects across Gateways?

**URL:** <https://forum.inductiveautomation.com/t/edit-projects-across-gateways/70786>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [March 8, 2023, 4:51pm UTC](https://forum.inductiveautomation.com/t/edit-projects-across-gateways/70786 "2023-03-08T16:51:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![danblibby](https://avatars.discourse-cdn.com/v4/letter/d/5e9695/32.png) [@danblibby](https://forum.inductiveautomation.com/u/danblibby)\
**Post date:** [March 8, 2023, 4:51pm UTC](https://forum.inductiveautomation.com/t/edit-projects-across-gateways/70786/1 "2023-03-08T16:51:39Z")

</div>

Hi Everyone,  
Still working on reworking our enterprise system with 10 projects at various locations with a hub/spoke architecture. I have cleaned up a lot of stuff and am slowly converting each spoke to version 8.1 and then finally transitioning the hub to 8.1. I have set up gateway networks between each spoke & hub and also setup remote tag provider.

My question is, can you push edits from one project to another or "link" projects through the gateway network? If I make a vision project change at a spoke can I push that edit to the Hub or do I need to do a Export/Import for individual items?

Thanks

---

<div class="post-metadata">

**Author:** ![andrews](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@andrews](https://forum.inductiveautomation.com/u/andrews)\
**Post date:** [March 8, 2023, 5:43pm UTC](https://forum.inductiveautomation.com/t/edit-projects-across-gateways/70786/2 "2023-03-08T17:43:47Z")

</div>

Are you using the EAM ?  
[Ignition Enterprise Administration Module | Manage Servers From One Location (inductiveautomation.com)](https://inductiveautomation.com/ignition/modules/eam)

---

<div class="post-metadata">

**Author:** ![danblibby](https://avatars.discourse-cdn.com/v4/letter/d/5e9695/32.png) [@danblibby](https://forum.inductiveautomation.com/u/danblibby)\
**Post date:** [March 8, 2023, 6:12pm UTC](https://forum.inductiveautomation.com/t/edit-projects-across-gateways/70786/3 "2023-03-08T18:12:07Z")

</div>

I am not, but perhaps that will answer my question. If it does I will look at purchasing the module.

---

<div class="post-metadata">

**Author:** ![lrose](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lrose/32/62724_2.png) [@lrose](https://forum.inductiveautomation.com/u/lrose)\
**Post date:** [March 8, 2023, 6:17pm UTC](https://forum.inductiveautomation.com/t/edit-projects-across-gateways/70786/4 "2023-03-08T18:17:26Z")

</div>

> [@danblibby](#):
>
> If I make a vision project change at a spoke can I push that edit to the Hub or do I need to do a Export/Import for individual items?

Without EAM you would need to do this manually.

---

<div class="post-metadata">

**Author:** ![andrews](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@andrews](https://forum.inductiveautomation.com/u/andrews)\
**Post date:** [March 8, 2023, 6:50pm UTC](https://forum.inductiveautomation.com/t/edit-projects-across-gateways/70786/5 "2023-03-08T18:50:01Z")

</div>

I believe it is what you are looking for.