# Electronic Signature

**URL:** <https://forum.inductiveautomation.com/t/electronic-signature/16262>\
**Category:** Ignition\
**Created:** [December 8, 2017, 5:12pm UTC](https://forum.inductiveautomation.com/t/electronic-signature/16262 "2017-12-08T17:12:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Curlyandshemp](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Curlyandshemp](https://forum.inductiveautomation.com/u/Curlyandshemp)\
**Post date:** [December 8, 2017, 5:12pm UTC](https://forum.inductiveautomation.com/t/electronic-signature/16262/1 "2017-12-08T17:12:07Z")

</div>

I have an Ignition application where an operator electronic signature is required. Has anyone had any success with electronic signature pads and Ignition. End goal is to have the electronic signature image stored with a record of a production run.

---

<div class="post-metadata">

**Author:** ![jpark](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@jpark](https://forum.inductiveautomation.com/u/jpark)\
**Post date:** [December 8, 2017, 9:17pm UTC](https://forum.inductiveautomation.com/t/electronic-signature/16262/2 "2017-12-08T21:17:18Z")

</div>

You can use the paintable canvas to grab a signature (microsoft surface or raspberry pi)  
Or you can create a module using the files topaz provides to capture signatures from their pads.