# Elements in flex repeater row don't scale in the direction opposite the direction of the repeater

**URL:** <https://forum.inductiveautomation.com/t/elements-in-flex-repeater-row-dont-scale-in-the-direction-opposite-the-direction-of-the-repeater/81736>\
**Category:** Ignition\
**Created:** [November 9, 2023, 6:39pm UTC](https://forum.inductiveautomation.com/t/elements-in-flex-repeater-row-dont-scale-in-the-direction-opposite-the-direction-of-the-repeater/81736 "2023-11-09T18:39:11Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [November 9, 2023, 10:13pm UTC](https://forum.inductiveautomation.com/t/elements-in-flex-repeater-row-dont-scale-in-the-direction-opposite-the-direction-of-the-repeater/81736/2 "2023-11-09T22:13:25Z")

</div>

I think you'll need to post some screengrabs and a list of the settings. For the settings copy the flex repeater from the Project Browser and past it into your post. Make sure you format it as code. See below:

> [@Wiki - how to post code on this forum](https://forum.inductiveautomation.com/t/wiki-how-to-post-code-on-this-forum/77831):
>
> This thread is intended as a short help file for all those struggling to post formatted code on the forum. Posting formatted code on the forum (and most others) is as simple as selecting the code and pressing the \</\> button. It works the same as applying Bold or Italic styles to your document. It preserves indentation and applies syntax highlighting. [How to post code]

---

_[View the full topic](https://forum.inductiveautomation.com/t/elements-in-flex-repeater-row-dont-scale-in-the-direction-opposite-the-direction-of-the-repeater/81736)._