# Emerson Drivers for New FB3000 RTU

**URL:** <https://forum.inductiveautomation.com/t/emerson-drivers-for-new-fb3000-rtu/103214>\
**Category:** General Discussion\
**Created:** [March 4, 2025, 4:06pm UTC](https://forum.inductiveautomation.com/t/emerson-drivers-for-new-fb3000-rtu/103214 "2025-03-04T16:06:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Arlen\_Irvin](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Arlen\_Irvin](https://forum.inductiveautomation.com/u/Arlen_Irvin)\
**Post date:** [March 4, 2025, 4:06pm UTC](https://forum.inductiveautomation.com/t/emerson-drivers-for-new-fb3000-rtu/103214/1 "2025-03-04T16:06:28Z")

</div>

We are starting to deploy some new Emerson RTUs and I'm wondering if there are ignition driver available.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [March 4, 2025, 4:27pm UTC](https://forum.inductiveautomation.com/t/emerson-drivers-for-new-fb3000-rtu/103214/2 "2025-03-04T16:27:03Z")

</div>

It looks like these support DNP3, so you should be able to use the DNP3 driver.

---

<div class="post-metadata">

**Author:** ![Arlen\_Irvin](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Arlen\_Irvin](https://forum.inductiveautomation.com/u/Arlen_Irvin)\
**Post date:** [March 4, 2025, 10:34pm UTC](https://forum.inductiveautomation.com/t/emerson-drivers-for-new-fb3000-rtu/103214/3 "2025-03-04T22:34:07Z")

</div>

> [@Kevin.Herron](#):
>
> ou should be able to use the DNP3 driver.

Thank you for the reply, that's exactly correct.