# Emulate 5000 - Ignition

**URL:** <https://forum.inductiveautomation.com/t/emulate-5000-ignition/88926>\
**Category:** Ignition\
**Created:** [April 16, 2024, 6:08pm UTC](https://forum.inductiveautomation.com/t/emulate-5000-ignition/88926 "2024-04-16T18:08:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Christian\_Tovanche](https://avatars.discourse-cdn.com/v4/letter/c/51bf81/32.png) [@Christian\_Tovanche](https://forum.inductiveautomation.com/u/Christian_Tovanche)\
**Post date:** [April 16, 2024, 6:08pm UTC](https://forum.inductiveautomation.com/t/emulate-5000-ignition/88926/1 "2024-04-16T18:08:08Z")

</div>

I need help with this mistake. the conection is OPC UA.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/3/239b932cbae8c6c903d31d4887b9de20edfab64a.png)

---

<div class="post-metadata">

**Author:** ![Christian\_Tovanche](https://avatars.discourse-cdn.com/v4/letter/c/51bf81/32.png) [@Christian\_Tovanche](https://forum.inductiveautomation.com/u/Christian_Tovanche)\
**Post date:** [April 16, 2024, 6:34pm UTC](https://forum.inductiveautomation.com/t/emulate-5000-ignition/88926/2 "2024-04-16T18:34:57Z")

</div>

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/4/c4ab9073c640a73fec7085d7e71d3903abaff86c.png)

---

<div class="post-metadata">

**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\
**Post date:** [April 16, 2024, 6:57pm UTC](https://forum.inductiveautomation.com/t/emulate-5000-ignition/88926/3 "2024-04-16T18:57:38Z")

</div>

Emulate discussions have been covered quite well. Try this post, follow Phil's guide and you should be good to go.

> [@OPC to Emulate, still looking for answers](https://forum.inductiveautomation.com/t/opc-to-emulate-still-looking-for-answers/80088/43):
>
> @pdixon, I know your question is about making OPC connections to RS Emulate, but I'm going to answer the question about making native Ignition driver connections to RS Emulate. Reviewing my first comment in this topic, I am happy to report that I was wrong. Necessary software, with versions I confirmed to work. Newer versions are expected to work: RSLogix\_Emulate5000 (install folder) aka "Studio 5000 Logix Emulate" (as shown in Control Panel Apps list), v32. FactoryTalk Linx, v6.11 R…