# Enterprise Administration Module - Adding Agent

**URL:** <https://forum.inductiveautomation.com/t/enterprise-administration-module-adding-agent/29491>\
**Category:** Ignition Early Access\
**Created:** [October 29, 2019, 4:34pm UTC](https://forum.inductiveautomation.com/t/enterprise-administration-module-adding-agent/29491 "2019-10-29T16:34:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jessa](https://avatars.discourse-cdn.com/v4/letter/j/fbc32d/32.png) [@jessa](https://forum.inductiveautomation.com/u/jessa)\
**Post date:** [October 29, 2019, 4:34pm UTC](https://forum.inductiveautomation.com/t/enterprise-administration-module-adding-agent/29491/1 "2019-10-29T16:34:57Z")

</div>

I have the controller setup, I’m trying to add an agent in the config section. Do I need to enable/configure something else in 8.0 so the setup is visible like in 7.9  
 ![0%20EAM%20Config](https://us1.discourse-cdn.com/inductiveautomation/original/2X/9/93c872792f94951682447bba93eba20105792b4c.png) ![9%20EAM%20Config](https://us1.discourse-cdn.com/inductiveautomation/original/2X/d/d1cd4e537215331bade6f21ecfaf5c7c6ce2e5a1.png)

---

<div class="post-metadata">

**Author:** ![James.Lorenz](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/james.lorenz/32/3290_2.png) [@James.Lorenz](https://forum.inductiveautomation.com/u/James.Lorenz)\
**Post date:** [October 29, 2019, 5:00pm UTC](https://forum.inductiveautomation.com/t/enterprise-administration-module-adding-agent/29491/2 "2019-10-29T17:00:51Z")

</div>

Looks like you’re accessing the gateway of the controller, you need to initialize the agent setup from the gateway of the agent.