# Error out of Memory

**URL:** <https://forum.inductiveautomation.com/t/error-out-of-memory/39170>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [September 29, 2020, 10:19am UTC](https://forum.inductiveautomation.com/t/error-out-of-memory/39170 "2020-09-29T10:19:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![informatica](https://avatars.discourse-cdn.com/v4/letter/i/3ab097/32.png) [@informatica](https://forum.inductiveautomation.com/u/informatica)\
**Post date:** [September 29, 2020, 10:19am UTC](https://forum.inductiveautomation.com/t/error-out-of-memory/39170/1 "2020-09-29T10:19:02Z")

</div>

Good Morning.

In Ignition **8.0.14** , I have developed an application that uses **several images** , but they are not very heavy (from 15 kb to 60 kb). If I run the application in the designer (F10), it runs without problems. But when running on a client PC, many images do not load or load randomly, and sometimes the error “_ **OutOfMemoryError: Java heap space** _” occurs, even though the process is **only using 400 MB of RAM**.  
In the project properties the **maximum client memory** has been increased to **4GB** , but this does not solve the issue.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/b/a/ba237e4a447dda78a8f7527b024b80495439d157.png)

Best Regards.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [September 29, 2020, 1:09pm UTC](https://forum.inductiveautomation.com/t/error-out-of-memory/39170/2 "2020-09-29T13:09:17Z")

</div>

Are you sure that memory setting is reaching the client? Open the client diagnostics (from the help menu) and watch the memory chart while that screen opens. You may need to re-create a launch shortcut.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [September 29, 2020, 1:13pm UTC](https://forum.inductiveautomation.com/t/error-out-of-memory/39170/3 "2020-09-29T13:13:34Z")

</div>

Can you share the full stack trace you get (from clicking “full” on that error message)?

---

<div class="post-metadata">

**Author:** ![informatica](https://avatars.discourse-cdn.com/v4/letter/i/3ab097/32.png) [@informatica](https://forum.inductiveautomation.com/u/informatica)\
**Post date:** [September 30, 2020, 9:51am UTC](https://forum.inductiveautomation.com/t/error-out-of-memory/39170/4 "2020-09-30T09:51:14Z")

</div>

Good morning.

I have already **fixed** the problem. Some images had a **very high resolution** although they were light (50 kb) because they had a large transparent area.  
I just lowered the resolution.

Best Regards.