# Error setting property to '0.0' for binding on Moving Analog Indicator processValue property

**URL:** <https://forum.inductiveautomation.com/t/error-setting-property-to-0-0-for-binding-on-moving-analog-indicator-processvalue-property/79661>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [September 26, 2023, 4:04pm UTC](https://forum.inductiveautomation.com/t/error-setting-property-to-0-0-for-binding-on-moving-analog-indicator-processvalue-property/79661 "2023-09-26T16:04:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Evan\_Pautz](https://avatars.discourse-cdn.com/v4/letter/e/46a35a/32.png) [@Evan\_Pautz](https://forum.inductiveautomation.com/u/Evan_Pautz)\
**Post date:** [September 26, 2023, 4:04pm UTC](https://forum.inductiveautomation.com/t/error-setting-property-to-0-0-for-binding-on-moving-analog-indicator-processvalue-property/79661/1 "2023-09-26T16:04:34Z")

</div>

I have a Moving Analog Indicator and I keep getting the following error, can anyone help me understand why?

"Error setting property to '0.0' for binding on BR\_ANALOG\_INDICATOR.BR\_ANALOG\_INDICATOR.Moving Analog Indicator.processValue"

BR\_ANALOG\_INDICATOR is a template witha Moving Analog Indicator, whose processValue is bound via Property to Internal Template Property Value(Float).  
I bind the Internal Template Property "Value" via Indirect Tag binding to {1}{2}/VALUE.value which is meant to grab the subproperty value from the tag "VALUE" (Float OPCUA Tag) whose tag path is provided through {1}{2} and passed in through Template Properties.

Only ever get the error in the designer, have yet to see it on the client. But it is everytime I switch designer tabs onto a window that uses BR\_ANALOG\_INDICATOR. If the tag that eventually feeds processValue is anything but 0 this error does not occur. Also will get this same error if any of the tags bound to LOW/HIGH Alarms on the Moving Analog Indicator go to 0.

---

<div class="post-metadata">

**Author:** ![Trenton\_Rhines](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/trenton_rhines/32/53328_2.png) [@Trenton\_Rhines](https://forum.inductiveautomation.com/u/Trenton_Rhines)\
**Post date:** [October 13, 2023, 11:41pm UTC](https://forum.inductiveautomation.com/t/error-setting-property-to-0-0-for-binding-on-moving-analog-indicator-processvalue-property/79661/2 "2023-10-13T23:41:07Z")

</div>

Hi @Evan_Pautz, it's hard to say what is going on here without doing further troubleshooting, so I recommend you reach out to our support department. They will be best equipped to help you handle this issue. You can open a ticket from  
[https://support.inductiveautomation.com/hc/en-us](https://support.inductiveautomation.com/hc/en-us)