# ETHERNET/IP Sensor Integration Gateway - SIG200

**URL:** <https://forum.inductiveautomation.com/t/ethernet-ip-sensor-integration-gateway-sig200/85449>\
**Category:** Ignition\
**Created:** [February 8, 2024, 5:05pm UTC](https://forum.inductiveautomation.com/t/ethernet-ip-sensor-integration-gateway-sig200/85449 "2024-02-08T17:05:01Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![RODFLO2](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@RODFLO2](https://forum.inductiveautomation.com/u/RODFLO2)\
**Post date:** [February 8, 2024, 5:05pm UTC](https://forum.inductiveautomation.com/t/ethernet-ip-sensor-integration-gateway-sig200/85449/1 "2024-02-08T17:05:01Z")

</div>

Hi,  
This SIG200 is an ethernet/IP sensor gateway. Can i connect this device directly with Ethernet/IP protocol?

> **[operating\_instructions\_sensor\_integration\_gateway\_sig200\_ethernet\_iptm\_r\_en\_im0090887.pdf](https://cdn.sick.com/media/docs/7/87/887/operating_instructions_sensor_integration_gateway_sig200_ethernet_iptm_r_en_im0090887.pdf)**
>
> 5.59 MB

Thanks a lot  
Rodrigo

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [February 8, 2024, 5:06pm UTC](https://forum.inductiveautomation.com/t/ethernet-ip-sensor-integration-gateway-sig200/85449/2 "2024-02-08T17:06:14Z")

</div>

Probably with @pturmel 's ENIP module, but not with anything first party Ignition driver.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [February 8, 2024, 5:10pm UTC](https://forum.inductiveautomation.com/t/ethernet-ip-sensor-integration-gateway-sig200/85449/3 "2024-02-08T17:10:02Z")

</div>

Yes, seems to use a generic profile. There would need to be some code on the Ignition side to manage the I/O Link traffic within the connection.

> **[Ignition Third-Party Module Showcase](https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-ethernetip-class-1-communications)**
>
> Easily extend Ignition's core functionality with Third-Party Modules. The Module Showcase is a great place to find a solution that best meets your needs.

---

<div class="post-metadata">

**Author:** ![RODFLO2](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@RODFLO2](https://forum.inductiveautomation.com/u/RODFLO2)\
**Post date:** [February 8, 2024, 5:13pm UTC](https://forum.inductiveautomation.com/t/ethernet-ip-sensor-integration-gateway-sig200/85449/4 "2024-02-08T17:13:55Z")

</div>

Thanks a lot for the answers, This module works with ignition edge 7.9?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [February 8, 2024, 5:28pm UTC](https://forum.inductiveautomation.com/t/ethernet-ip-sensor-integration-gateway-sig200/85449/5 "2024-02-08T17:28:06Z")

</div>

No, Edge in general does not allow third party modules to be installed.