# Ethernet PLC 5 Comms Not Working On 8.3.4 But Works On 8.3.3

**URL:** <https://forum.inductiveautomation.com/t/ethernet-plc-5-comms-not-working-on-8-3-4-but-works-on-8-3-3/117861>\
**Category:** Ignition\
**Tags:** ignition83\
**Created:** [November 16, 2026, 6:59pm UTC](https://forum.inductiveautomation.com/t/ethernet-plc-5-comms-not-working-on-8-3-4-but-works-on-8-3-3/117861 "2026-11-16T18:59:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![koenigs.alex](https://avatars.discourse-cdn.com/v4/letter/k/919ad9/32.png) [@koenigs.alex](https://forum.inductiveautomation.com/u/koenigs.alex)\
**Post date:** [November 16, 2026, 6:59pm UTC](https://forum.inductiveautomation.com/t/ethernet-plc-5-comms-not-working-on-8-3-4-but-works-on-8-3-3/117861/1 "2026-11-16T18:59:38Z")

</div>

I have an Allen Bradly ethernet PLC 5 (5/20E). This PLC sits on a different network then my 2 Ignition servers. Due to Ignitions supporting only direct connection for communication to this PLC I am using a 1783-NATR as a bridge between the 2 networks. This worked for only one of my 2 Ignition servers. Both servers have the same driver configuration but only one will connect. The only difference I can see is the server that works is version 8.3.3 and the server that isn't working is version 8.3.4.

Am I missing something or is the version difference a problem?
