# Factory Talk Linx Gateway UA mode and Ignition Designer **URL:** \ **Category:** Ignition\ **Created:** [June 4, 2018, 6:19pm UTC](https://forum.inductiveautomation.com/t/factory-talk-linx-gateway-ua-mode-and-ignition-designer/18284 "2018-06-04T18:19:41Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [June 4, 2018, 7:14pm UTC](https://forum.inductiveautomation.com/t/factory-talk-linx-gateway-ua-mode-and-ignition-designer/18284/2 "2018-06-04T19:14:26Z")
> [@OPC-DA to RSLinx Classic (Emulated PLC)](http://forum.inductiveautomation.com/t/opc-da-to-rslinx-classic-emulated-plc/11667/13): > > Hello Ignitioneers… Just as an FYI, I have been testing the new FactoryTalk Linx Gateway v6.00. This version now contains the new OPC-UA driver along side the OPC-DA driver. Being a beta tester for this product, I noticed early on it was a bit buggy, unfortunately. One really annoying bug is that all the OPC tags are doubled in the Ignition OPC Browser… every folder and every tag are displayed twice. I also conducted some rudimentary round trip testing on single tags and the Ignition OPC-UA d… --- _[View the full topic](https://forum.inductiveautomation.com/t/factory-talk-linx-gateway-ua-mode-and-ignition-designer/18284)._