# Fanuc FOCAS to Ignition **URL:** \ **Category:** Ignition\ **Created:** [August 25, 2023, 8:24pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412 "2023-08-25T20:24:56Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Faz](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@Faz](https://forum.inductiveautomation.com/u/Faz)\ **Post date:** [August 25, 2023, 8:24pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/1 "2023-08-25T20:24:56Z")
Does anyone know if there is a module that can be used with Fanuc FOCAS enabled CNC machines. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [August 25, 2023, 8:26pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/2 "2023-08-25T20:26:37Z")
There's an MTConnect driver in the showcase, IIRC. Otherwise you'll need Kepware. The underlying protocol drivers are Windows-only and do not play well with Java. ---
**Author:** ![Faz](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@Faz](https://forum.inductiveautomation.com/u/Faz)\ **Post date:** [August 25, 2023, 8:32pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/3 "2023-08-25T20:32:40Z")
yes, i saw MTConnect driver info. Since our machines already equipped FOCAS, we are trying to use them. I'm pretty new to Kepware. Any information how i should use Kepware to communicate with FOCAS? Thank you, ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 25, 2023, 8:35pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/4 "2023-08-25T20:35:07Z")
> **[Fanuc Focas Ethernet | Kepware | PTC](https://www.ptc.com/en/store/kepware/drivers/fanuc-focas-ethernet)** > > The Fanuc Focas Ethernet device driver work in conjunction with KEPServerEX to provide data exchange between OPC clients and Focas CNCs. [https://docs.inductiveautomation.com/display/DOC81/Connecting+to+Kepware+OPC+UA](https://docs.inductiveautomation.com/display/DOC81/Connecting+to+Kepware+OPC+UA) ---
**Author:** ![Faz](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@Faz](https://forum.inductiveautomation.com/u/Faz)\ **Post date:** [August 25, 2023, 8:37pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/5 "2023-08-25T20:37:26Z")
Thank you very much! Let me go through this. ---
**Author:** ![Faz](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@Faz](https://forum.inductiveautomation.com/u/Faz)\ **Post date:** [September 8, 2023, 4:51pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/6 "2023-09-08T16:51:26Z")
I was asked by Ignition team that Focas can be connected to ignition OPC connection. This is an instruction guide: [Integrating Fanuc FASOPC with Ignition SCADA | Corso Systems](https://corsosystems.com/posts/integrating-fanuc-fasopc-and-ignition) However, now i have this below issue: ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/e/0eb4a7a80ffa499515fd7786f64acf2c5cd89cd6.png) I think issue is here: ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/7/07296b18108bb066cc272259d7c45b215987b1d4.png) I don't know how to set the localhost:xxxx/discovery portion. Don't know where to find xxxxx numbers. Can anyone help? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [September 8, 2023, 5:05pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/7 "2023-09-08T17:05:29Z")
> [@Faz](#): > > Don't know where to find xxxxx numbers. Talk to whoever set up the FASOPC server. ---
**Author:** ![Faz](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@Faz](https://forum.inductiveautomation.com/u/Faz)\ **Post date:** [September 8, 2023, 5:06pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/8 "2023-09-08T17:06:41Z")
Ok sounds good. thanks ---
**Author:** ![Faz](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@Faz](https://forum.inductiveautomation.com/u/Faz)\ **Post date:** [September 19, 2023, 11:08pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/9 "2023-09-19T23:08:55Z")
Can someone help me how to do addressing in kepware for FASOPC tags? ---
**Author:** ![B.J](https://avatars.discourse-cdn.com/v4/letter/b/a9adbd/32.png) [@B.J](https://forum.inductiveautomation.com/u/B.J)\ **Post date:** [July 26, 2024, 12:53pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/10 "2024-07-26T12:53:40Z")
> [@Faz](#): > > omeone help me how to do addressing in kepware for FASOPC tag @Faz - have you figured out the solution to the above, i.e. how to configure FASOPC tag addressing in Kepware? I am interested. ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [July 26, 2024, 1:49pm UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/12 "2024-07-26T13:49:30Z")
Alejandro, can you edit your post to give a link to the source of these instructions? It's not ChatGPT again, is it? ---
**Author:** ![Alejandro\_Alaco](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/alejandro_alaco/32/59849_2.png) [@Alejandro\_Alaco](https://forum.inductiveautomation.com/u/Alejandro_Alaco)\ **Post date:** [July 29, 2024, 6:46am UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/13 "2024-07-29T06:46:07Z")
yes, I didn´t put the source, was chatgpt this .doc may have some info: [Fanuc Focas Ethernet Driver Help (opcturkey.com)](https://www.opcturkey.com/uploads/fanuc-focas-ethernet-manual.pdf) [Fanuc Focas Ethernet Driver Help (opcturkey.com)](https://www.opcturkey.com/uploads/v5-fanuc-focas-ethernet-manual.pdf) ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [July 29, 2024, 11:29am UTC](https://forum.inductiveautomation.com/t/fanuc-focas-to-ignition/78412/14 "2024-07-29T11:29:56Z")
> [@Alejandro\_Alaco](#): > > was chatgpt You need to reread this forum's rules: [https://forum.inductiveautomation.com/faq](https://forum.inductiveautomation.com/faq)