# FEATURE- 14878\] Chart Information

**URL:** <https://forum.inductiveautomation.com/t/feature-14878-chart-information/27908>\
**Category:** Ignition\
**Created:** [August 30, 2019, 3:33pm UTC](https://forum.inductiveautomation.com/t/feature-14878-chart-information/27908 "2019-08-30T15:33:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kstewart](https://avatars.discourse-cdn.com/v4/letter/k/dbc845/32.png) [@kstewart](https://forum.inductiveautomation.com/u/kstewart)\
**Post date:** [August 30, 2019, 3:33pm UTC](https://forum.inductiveautomation.com/t/feature-14878-chart-information/27908/1 "2019-08-30T15:33:54Z")

</div>

So I have been working with these charts for some time now and have got most of it down, but I am having a problem with getting the all the information that I want showed on the points. I would like when you hover over a point it displays other information then just the time and the point it is on.

---

<div class="post-metadata">

**Author:** ![jball](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jball/32/11128_2.png) [@jball](https://forum.inductiveautomation.com/u/jball)\
**Post date:** [August 30, 2019, 3:58pm UTC](https://forum.inductiveautomation.com/t/feature-14878-chart-information/27908/2 "2019-08-30T15:58:18Z")

</div>

Hi @kstewart, are you referring to the Time Series Chart? Can you elaborate on the additional data you would like displayed?

---

<div class="post-metadata">

**Author:** ![kstewart](https://avatars.discourse-cdn.com/v4/letter/k/dbc845/32.png) [@kstewart](https://forum.inductiveautomation.com/u/kstewart)\
**Post date:** [August 30, 2019, 4:26pm UTC](https://forum.inductiveautomation.com/t/feature-14878-chart-information/27908/3 "2019-08-30T16:26:59Z")

</div>

Yes this is a time series chart. The whole data set is with this chart but is only displaying one of the columns (which is what I want it to do), but I would like to show the rest of the data set information when you hover over the item.

---

<div class="post-metadata">

**Author:** ![jball](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jball/32/11128_2.png) [@jball](https://forum.inductiveautomation.com/u/jball)\
**Post date:** [August 30, 2019, 5:06pm UTC](https://forum.inductiveautomation.com/t/feature-14878-chart-information/27908/4 "2019-08-30T17:06:43Z")

</div>

Gotcha. So you’re just limiting the columns that are displaying by adding to the `columns` array of the trend, but the chart still has the full data set. This is definitely a good request.

For a use case like this, I should be able to add a `showAllData` flag to the `xTrace` config so that you can show ALL data at that point (vs just the charted data).