# \[FEATURE-15423\] Time Series Chart Xtrace **URL:** \ **Category:** Ignition Early Access\ **Created:** [November 11, 2019, 4:17pm UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850 "2019-11-11T16:17:44Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![weertske](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/weertske/32/3353_2.png) [@weertske](https://forum.inductiveautomation.com/u/weertske)\ **Post date:** [November 11, 2019, 4:17pm UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850/1 "2019-11-11T16:17:44Z")
In Vision Easy Chart we have selectedXValue to detect cursor location on the time series. Do we have something similar for the Perspectives Time Series Chart? ---
**Author:** ![jball](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jball/32/11128_2.png) [@jball](https://forum.inductiveautomation.com/u/jball)\ **Post date:** [November 11, 2019, 5:02pm UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850/2 "2019-11-11T17:02:39Z")
Currently, we do not. The x-trace is only on screen during the mouse hover state of the chart (unless viewing via mobile which is touch responsive), so it’s data point is not surfaced via a property. That said, it wouldn’t be a hard addition. I will open a feature request. ---
**Author:** ![weertske](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/weertske/32/3353_2.png) [@weertske](https://forum.inductiveautomation.com/u/weertske)\ **Post date:** [November 11, 2019, 5:16pm UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850/3 "2019-11-11T17:16:27Z")
Thank you. To allow us to interact with the chart and select data for further analysis. It is a needed feature. ---
**Author:** ![jasoncoope](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jasoncoope/32/18674_2.png) [@jasoncoope](https://forum.inductiveautomation.com/u/jasoncoope)\ **Post date:** [April 16, 2021, 7:58pm UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850/4 "2021-04-16T19:58:26Z")
Has this been implemented? I also need the ability to interact with the chart so that a user can exclude certain data points from the Control chart. ---
**Author:** ![weertske](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/weertske/32/3353_2.png) [@weertske](https://forum.inductiveautomation.com/u/weertske)\ **Post date:** [April 17, 2021, 4:26pm UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850/5 "2021-04-17T16:26:53Z")
Yes it has been implemented. However, the Power Chart component is a far better tool to use. ---
**Author:** ![jasoncoope](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jasoncoope/32/18674_2.png) [@jasoncoope](https://forum.inductiveautomation.com/u/jasoncoope)\ **Post date:** [April 18, 2021, 4:42pm UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850/6 "2021-04-18T16:42:06Z")
Cheers, I see now the timestamp is exposed in the X-Trace values property. As much as I want to use the power chart, the data I’m displaying has production context. So my queries are built around pulling all data points for product X or product Y. I looked at the DB Table Historian Provider but don’t see that I can really use it, hence I’m stuck with the Time Series Chart, which is a shame as I want to exclude data points and add annotations. If I’m missing an obvious way to still use the DB Table Historian Provider, I’m all ears…! ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/8/c890b242885787b509e025ba0a8babbfc73b344b.png) ---
**Author:** ![jason.myers](https://avatars.discourse-cdn.com/v4/letter/j/dc4da7/32.png) [@jason.myers](https://forum.inductiveautomation.com/u/jason.myers)\ **Post date:** [August 29, 2024, 2:13am UTC](https://forum.inductiveautomation.com/t/feature-15423-time-series-chart-xtrace/29850/7 "2024-08-29T02:13:21Z")
I'm looking for a similar feature. I need to display the batch number and dimensions. If we were able to access the x,y and timestamp of the Power Chart it would be much more powerful.