# \[FEATURE-16567\] Perspective Table Row Height **URL:** \ **Category:** Ignition Early Access\ **Created:** [March 26, 2020, 9:56pm UTC](https://forum.inductiveautomation.com/t/feature-16567-perspective-table-row-height/33466 "2020-03-26T21:56:00Z")\ **Posts on this page:** 1\ **Showing post:** 9
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [September 22, 2020, 12:26pm UTC](https://forum.inductiveautomation.com/t/feature-16567-perspective-table-row-height/33466/9 "2020-09-22T12:26:00Z")
This feature is a necessity when using embedded views... Case in point (see the bottom screenshot of the linked post) Long short: I wanted to have a "table" of embedded views but flex repeater was way too slow and unperformant, even with 10 rows. Moved to using a virtualised Table with 1 column set to use a viewPath. Much more performant and actually useable now, however the height of each row which should be 81px as per the height of the embedded view is ~805px tall in the table! That's a lot of user scrolling to see 600 rows... > [@Perspective: Designing a "table" for mobile and PC](http://forum.inductiveautomation.com/t/perspective-designing-a-table-for-mobile-and-pc/38205/24): > > Got it. I found this in the user manual… not very obvious, also very strange to implement, see the blank “EmbeddedView” object: [image] The reason there’s an empty “EmbeddedView” key is so that it’s associated with the EmbeddedView column… I have no idea what would happen if I wanted to have multiple columns where each one used an embedded view with the same params (and if so, what if those params needed different values??) and my Embedded View params definitions: [image] I still … --- _[View the full topic](https://forum.inductiveautomation.com/t/feature-16567-perspective-table-row-height/33466)._