# \[Feature-8604\] Report Viewer Zoom Factor

**URL:** <https://forum.inductiveautomation.com/t/feature-8604-report-viewer-zoom-factor/25088>\
**Category:** Ignition\
**Created:** [May 17, 2019, 12:11am UTC](https://forum.inductiveautomation.com/t/feature-8604-report-viewer-zoom-factor/25088 "2019-05-17T00:11:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cgenasci](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@cgenasci](https://forum.inductiveautomation.com/u/cgenasci)\
**Post date:** [May 17, 2019, 12:11am UTC](https://forum.inductiveautomation.com/t/feature-8604-report-viewer-zoom-factor/25088/1 "2019-05-17T00:11:08Z")

</div>

Is there a way to have the default zoom on the report viewer set to ‘Fit Panel’? We have a variety of screen sizes around our facility and it is cumbersome to always have to select ‘Fit Panel’ from the drop down before you can see any data.

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [May 17, 2019, 2:27pm UTC](https://forum.inductiveautomation.com/t/feature-8604-report-viewer-zoom-factor/25088/2 "2019-05-17T14:27:41Z")

</div>

I don’t see a way to access “Fit Panel” through scripting. The best I can offer right now is a hacky workaround of knowing what zoom factor you need based on the screen size (see `system.gui.getScreens()` ) and then setting the zoom factor via scripting on opening the window containing the report viewer.

We do have a ticket for this – I’ll note on the ticket that this is an issue for you and see if that bumps up the priority.

---

<div class="post-metadata">

**Author:** ![awalker](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/awalker/32/6874_2.png) [@awalker](https://forum.inductiveautomation.com/u/awalker)\
**Post date:** [June 10, 2019, 11:25pm UTC](https://forum.inductiveautomation.com/t/feature-8604-report-viewer-zoom-factor/25088/3 "2019-06-10T23:25:54Z")

</div>

This feature was added in the 8.0.3 nightly build that was uploaded today (6/10).