# Fighting with Maker installation on Raspberry PI

**URL:** <https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085>\
**Category:** Maker\
**Created:** [December 30, 2022, 12:22am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085 "2022-12-30T00:22:18Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![cookrobe](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@cookrobe](https://forum.inductiveautomation.com/u/cookrobe)\
**Post date:** [December 30, 2022, 12:22am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/1 "2022-12-30T00:22:18Z")

</div>

I have maker installed on Raspberry PI, almost....

Terminal indicates that the gateway is running. However, when I access the webpage, is says that the gateway is faulted.

 ![ScreenshotIggyGateway](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/c/7ce8cf0097ba891ae6e8152c918a35a751296c06.jpeg)

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 30, 2022, 12:40am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/2 "2022-12-30T00:40:13Z")

</div>

Can you upload the wrapper log files?

---

<div class="post-metadata">

**Author:** ![cookrobe](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@cookrobe](https://forum.inductiveautomation.com/u/cookrobe)\
**Post date:** [December 30, 2022, 12:46am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/3 "2022-12-30T00:46:05Z")

</div>

Here you go!  
[RpiWrapper.zip](https://forum.inductiveautomation.com/uploads/short-url/k51tTsJwrdhDkqv99doYSNavKU0.zip) (9.5 KB)

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 30, 2022, 12:49am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/4 "2022-12-30T00:49:37Z")

</div>

Looks like you downloaded an x64 version of Ignition.

You'll need to download the arm32 or arm64 version (depends on the RPi and OS) from this page and select maker during commissioning: [Current Ignition Release | Inductive Automation](https://inductiveautomation.com/downloads/ignition/8.1.23)

---

<div class="post-metadata">

**Author:** ![cookrobe](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@cookrobe](https://forum.inductiveautomation.com/u/cookrobe)\
**Post date:** [December 30, 2022, 12:51am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/5 "2022-12-30T00:51:21Z")

</div>

Will give it a try!

---

<div class="post-metadata">

**Author:** ![cookrobe](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@cookrobe](https://forum.inductiveautomation.com/u/cookrobe)\
**Post date:** [December 30, 2022, 1:34am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/6 "2022-12-30T01:34:54Z")

</div>

I downloaded the arm32 and installed with the same result. but, but RPi is a 64 bit OS due to the zwavejs-ui requirement. I would have thought the 32 bit one would have worked on the 64.

I only see: Ignition-linux-armhf-32-8.1.23.zip, is there a 64 bit one?

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [December 30, 2022, 1:52am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/7 "2022-12-30T01:52:02Z")

</div>

Yes, they are marked "AARCH64".

---

<div class="post-metadata">

**Author:** ![cookrobe](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@cookrobe](https://forum.inductiveautomation.com/u/cookrobe)\
**Post date:** [December 30, 2022, 3:58am UTC](https://forum.inductiveautomation.com/t/fighting-with-maker-installation-on-raspberry-pi/68085/8 "2022-12-30T03:58:31Z")

</div>

Thanks guys! That was it! Next up, connecting zwavejs-ui MQTT to it!