# Finding "Label" Column in Alarm Journal Database **URL:** \ **Category:** Ignition\ **Created:** [February 25, 2021, 5:41pm UTC](https://forum.inductiveautomation.com/t/finding-label-column-in-alarm-journal-database/43834 "2021-02-25T17:41:22Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![mikehill100](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mikehill100](https://forum.inductiveautomation.com/u/mikehill100)\ **Post date:** [February 25, 2021, 5:41pm UTC](https://forum.inductiveautomation.com/t/finding-label-column-in-alarm-journal-database/43834/1 "2021-02-25T17:41:22Z")
Hey Everyone, There’s a column in the alarm journal called “Label.” There’s no column in the alarm journal for this. Does anybody know how this value is extracted? ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [February 25, 2021, 5:51pm UTC](https://forum.inductiveautomation.com/t/finding-label-column-in-alarm-journal-database/43834/2 "2021-02-25T17:51:45Z")
Label is stored in the event data table (if your journal configuration is set to store it); by default, the alarm journal doesn’t store ‘static’ configuration, so unless you have a binding on the label property (or have configured your journal to store static config) you won’t see it in the journal. ---
**Author:** ![mikehill100](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mikehill100](https://forum.inductiveautomation.com/u/mikehill100)\ **Post date:** [February 26, 2021, 2:08pm UTC](https://forum.inductiveautomation.com/t/finding-label-column-in-alarm-journal-database/43834/3 "2021-02-26T14:08:00Z")
> [@paul-griffith](#): > > ta table (if your journal configuratio Thanks this was very helpful. You are good at your job.