# Flashing buttons depending on Alarm priority

**URL:** <https://forum.inductiveautomation.com/t/flashing-buttons-depending-on-alarm-priority/28782>\
**Category:** Ignition\
**Created:** [October 3, 2019, 1:47pm UTC](https://forum.inductiveautomation.com/t/flashing-buttons-depending-on-alarm-priority/28782 "2019-10-03T13:47:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ntsib](https://avatars.discourse-cdn.com/v4/letter/n/4af34b/32.png) [@ntsib](https://forum.inductiveautomation.com/u/ntsib)\
**Post date:** [October 3, 2019, 1:47pm UTC](https://forum.inductiveautomation.com/t/flashing-buttons-depending-on-alarm-priority/28782/1 "2019-10-03T13:47:39Z")

</div>

Hello Ignition Forum!!

So, I am working on a project with a very big amount of alarms and i am trying to set all the alarming system with a way to be very simple for an operator to manage it.  
I have 15 stations to control with its equipment inside so in my main window i have 15 buttons for each control panel of the stations.  
All the alarms are separated in 3 priorities (Low, High, Critical) with the specific coloring (blue, yellow, red)

My aim is to group the alarms by each station and when an alarm is triggered in a station then the station’s button should be flashing with the specific coloring depending on the priority.  
If there are more alarms in a station with a different priority then the flashing color button should be that with the highest priority.

So, can i make a button flash by occasion?