# Flexrepeater view being cut off from the top

**URL:** <https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705>\
**Category:** Ignition\
**Tags:** ignition81, perspective\
**Created:** [November 18, 2022, 8:22pm UTC](https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705 "2022-11-18T20:22:31Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sahil\_Nagpal](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@Sahil\_Nagpal](https://forum.inductiveautomation.com/u/Sahil_Nagpal)\
**Post date:** [November 18, 2022, 8:22pm UTC](https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705/1 "2022-11-18T20:22:31Z")

</div>

Hi,  
I am trying to use a flex repeater in my application. One issue that I am having is that the flex repeater seems to be cut off from the top by the header.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/1/81ae7b4ede2fdb5d3c79d20b2f5d333d022b419f.png)

Anyone run into this issue and want to recommend anything?

---

<div class="post-metadata">

**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\
**Post date:** [November 18, 2022, 8:37pm UTC](https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705/2 "2022-11-18T20:37:59Z")

</div>

Do you have the Header (Docked View) set to cover content? Or is it configured to "push" content?

---

<div class="post-metadata">

**Author:** ![Sahil\_Nagpal](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@Sahil\_Nagpal](https://forum.inductiveautomation.com/u/Sahil_Nagpal)\
**Post date:** [November 18, 2022, 8:40pm UTC](https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705/3 "2022-11-18T20:40:28Z")

</div>

It is set to "push".

---

<div class="post-metadata">

**Author:** ![Sahil\_Nagpal](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@Sahil\_Nagpal](https://forum.inductiveautomation.com/u/Sahil_Nagpal)\
**Post date:** [November 18, 2022, 8:41pm UTC](https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705/4 "2022-11-18T20:41:49Z")

</div>

If I use marginTop on the flexrepeater, I can get it to push down, but then if I zoom in or out, it again distorts.

---

<div class="post-metadata">

**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\
**Post date:** [November 18, 2022, 8:57pm UTC](https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705/5 "2022-11-18T20:57:17Z")

</div>

Under no circumstance should the Primary View display under the top Docked View if the configuration is to "push" content. Given such a configuration, the content should be pushed down - resulting in scrollbars.

Please verify you've saved the project. If you have indeed saved the project and you still see this behavior you might need to reach out to Support because this is unexpected behavior.

Edit:  
Could you share a screenshot of the _entire_ page? I'm curious if there are scrollbars to the side that have just been omitted from the screenshot.

---

<div class="post-metadata">

**Author:** ![Sahil\_Nagpal](https://avatars.discourse-cdn.com/v4/letter/s/22d042/32.png) [@Sahil\_Nagpal](https://forum.inductiveautomation.com/u/Sahil_Nagpal)\
**Post date:** [November 18, 2022, 9:32pm UTC](https://forum.inductiveautomation.com/t/flexrepeater-view-being-cut-off-from-the-top/66705/6 "2022-11-18T21:32:13Z")

</div>

Hi looks like the issue was that the flex container's property, (outside the flex repeater) the content and items flex properties were set to flex start and flex-end respectively. This caused this issue.