# Floats from iQR Mitsubishi Controller

**URL:** <https://forum.inductiveautomation.com/t/floats-from-iqr-mitsubishi-controller/114805>\
**Category:** Ignition\
**Created:** [March 31, 2026, 4:57pm UTC](https://forum.inductiveautomation.com/t/floats-from-iqr-mitsubishi-controller/114805 "2026-03-31T16:57:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![toddhowden](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@toddhowden](https://forum.inductiveautomation.com/u/toddhowden)\
**Post date:** [March 31, 2026, 4:57pm UTC](https://forum.inductiveautomation.com/t/floats-from-iqr-mitsubishi-controller/114805/1 "2026-03-31T16:57:15Z")

</div>

I am reading two consecutive registers in a iQR controller and they should read as a float. Instead I am getting a really large integer number, so it appears it may be just combining them and they may be in the incorrect order (hi/lo). What is the best way to read a float value from an iQR accurately. Thanks,

---

<div class="post-metadata">

**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Post date:** [March 31, 2026, 6:26pm UTC](https://forum.inductiveautomation.com/t/floats-from-iqr-mitsubishi-controller/114805/2 "2026-03-31T18:26:41Z")

</div>

Can you post your current OPC address configured?

---

<div class="post-metadata">

**Author:** ![toddhowden](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@toddhowden](https://forum.inductiveautomation.com/u/toddhowden)\
**Post date:** [March 31, 2026, 6:54pm UTC](https://forum.inductiveautomation.com/t/floats-from-iqr-mitsubishi-controller/114805/3 "2026-03-31T18:54:52Z")

</div>

I believe I was able to figure it out using []Daddress. It seems be reading the two consecutive registers correctly. Thanks for the response.