# Fuji PLC connection

**URL:** <https://forum.inductiveautomation.com/t/fuji-plc-connection/29062>\
**Category:** Ignition\
**Created:** [October 14, 2019, 8:26am UTC](https://forum.inductiveautomation.com/t/fuji-plc-connection/29062 "2019-10-14T08:26:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![corey](https://avatars.discourse-cdn.com/v4/letter/c/838e76/32.png) [@corey](https://forum.inductiveautomation.com/u/corey)\
**Post date:** [October 14, 2019, 8:26am UTC](https://forum.inductiveautomation.com/t/fuji-plc-connection/29062/1 "2019-10-14T08:26:28Z")

</div>

Has any one had any success of connecting a Fuji PLC to ignition?? (Ethernet). Perhaps with an OPC server (Kepware) we have a site with a few Fuji PLC’s that would be nice to integrate to an existing ignition gateway.

---

<div class="post-metadata">

**Author:** ![brandon222](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@brandon222](https://forum.inductiveautomation.com/u/brandon222)\
**Post date:** [May 7, 2020, 5:21pm UTC](https://forum.inductiveautomation.com/t/fuji-plc-connection/29062/2 "2020-05-07T17:21:52Z")

</div>

Wondering if you ever got an answer to this