# Full Windows AD Setup

**URL:** <https://forum.inductiveautomation.com/t/full-windows-ad-setup/72246>\
**Category:** Ignition\
**Created:** [April 10, 2023, 9:09am UTC](https://forum.inductiveautomation.com/t/full-windows-ad-setup/72246 "2023-04-10T09:09:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Christianto\_Hermawan](https://avatars.discourse-cdn.com/v4/letter/c/a9adbd/32.png) [@Christianto\_Hermawan](https://forum.inductiveautomation.com/u/Christianto_Hermawan)\
**Post date:** [April 10, 2023, 9:09am UTC](https://forum.inductiveautomation.com/t/full-windows-ad-setup/72246/1 "2023-04-10T09:09:36Z")

</div>

Hi Team,  
We're using Ignition 8.1 and new into this.  
We're trying to connect our Ignition to our Windows Active Directory for user & role management.  
We can get all user for specific AD Groups and its Group name as our Roles in "Users, Roles" menu, but I tried to test login in the IDP using that User Source and get no Role.  
Is there any missing steps I need to check ?

Thanks

---

<div class="post-metadata">

**Author:** ![andrews](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@andrews](https://forum.inductiveautomation.com/u/andrews)\
**Post date:** [April 11, 2023, 2:27pm UTC](https://forum.inductiveautomation.com/t/full-windows-ad-setup/72246/2 "2023-04-11T14:27:34Z")

</div>

did you set the user source in project properties?

---

<div class="post-metadata">

**Author:** ![Christianto\_Hermawan](https://avatars.discourse-cdn.com/v4/letter/c/a9adbd/32.png) [@Christianto\_Hermawan](https://forum.inductiveautomation.com/u/Christianto_Hermawan)\
**Post date:** [April 27, 2023, 12:29pm UTC](https://forum.inductiveautomation.com/t/full-windows-ad-setup/72246/3 "2023-04-27T12:29:05Z")

</div>

Hi Andrews,  
thanks for your response.  
It was solved, just due to lack of knowledge for AD Query.  
After several trial and error and it's working fine 😃