# Gateway modifications lost on power fail

**URL:** <https://forum.inductiveautomation.com/t/gateway-modifications-lost-on-power-fail/32988>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [March 10, 2020, 8:03pm UTC](https://forum.inductiveautomation.com/t/gateway-modifications-lost-on-power-fail/32988 "2020-03-10T20:03:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![McAlisterD](https://avatars.discourse-cdn.com/v4/letter/m/4491bb/32.png) [@McAlisterD](https://forum.inductiveautomation.com/u/McAlisterD)\
**Post date:** [March 10, 2020, 8:03pm UTC](https://forum.inductiveautomation.com/t/gateway-modifications-lost-on-power-fail/32988/1 "2020-03-10T20:03:45Z")

</div>

I am editing the project on a gateway. I started by copying the running project. I then fixed the problems that caused (duplicated transaction groups,etc) then ran a backup of the gateway. I then modified the new project. This morning the power was cycled on the gateway and a vision client and the new project on the gateway is now gone. I have a backup that should recover most of the modifications, but now I am trying to figure out what happened to the project.

---

<div class="post-metadata">

**Author:** ![McAlisterD](https://avatars.discourse-cdn.com/v4/letter/m/4491bb/32.png) [@McAlisterD](https://forum.inductiveautomation.com/u/McAlisterD)\
**Post date:** [April 2, 2020, 8:52pm UTC](https://forum.inductiveautomation.com/t/gateway-modifications-lost-on-power-fail/32988/2 "2020-04-02T20:52:34Z")

</div>

Problem solved. It was not Ignition. It was a problem with disk caching on the Gateway computer