# Gateway network vision Window access **URL:** \ **Category:** Ignition\ **Created:** [September 26, 2018, 10:59am UTC](https://forum.inductiveautomation.com/t/gateway-network-vision-window-access/19829 "2018-09-26T10:59:06Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![roshanbhosale](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/roshanbhosale/32/4899_2.png) [@roshanbhosale](https://forum.inductiveautomation.com/u/roshanbhosale)\ **Post date:** [September 26, 2018, 10:59am UTC](https://forum.inductiveautomation.com/t/gateway-network-vision-window-access/19829/1 "2018-09-26T10:59:06Z")
Hi, I am working with network gateway architectures spread across multiple networks (Still in design phase). I know that tags and alarms are accessible across multiple gateways when connected as gateway network. But is it possible to share the vision windows across multiple gateways… ---
**Author:** ![mgross](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mgross/32/3311_2.png) [@mgross](https://forum.inductiveautomation.com/u/mgross)\ **Post date:** [September 26, 2018, 2:03pm UTC](https://forum.inductiveautomation.com/t/gateway-network-vision-window-access/19829/3 "2018-09-26T14:03:57Z")
You can’t share Vision windows on the fly. What you can do is use the EAM module to set up a task that sends a window to a remote gateway over the gateway network. ---
**Author:** ![roshanbhosale](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/roshanbhosale/32/4899_2.png) [@roshanbhosale](https://forum.inductiveautomation.com/u/roshanbhosale)\ **Post date:** [October 4, 2018, 5:08am UTC](https://forum.inductiveautomation.com/t/gateway-network-vision-window-access/19829/4 "2018-10-04T05:08:34Z")
Thanks for the reply @mgross