# Gateway thread deadlock detected

**URL:** <https://forum.inductiveautomation.com/t/gateway-thread-deadlock-detected/24718>\
**Category:** Ignition Early Access\
**Created:** [May 7, 2019, 2:35am UTC](https://forum.inductiveautomation.com/t/gateway-thread-deadlock-detected/24718 "2019-05-07T02:35:50Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ASF](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@ASF](https://forum.inductiveautomation.com/u/ASF)\
**Post date:** [May 7, 2019, 2:35am UTC](https://forum.inductiveautomation.com/t/gateway-thread-deadlock-detected/24718/1 "2019-05-07T02:35:50Z")

</div>

Just encountered a deadlocked thread. I note there are already a couple of, ah, threads, on the topic, but they have reportedly all been fixed in a subsequent build so I guess my case is a new one?

Thread dump attached, currently running the 8.0.2 Nightly snapshot from 3rd May[Ignition-V1BIO-PT00001\_thread\_dump20190507-122034.txt](https://us1.discourse-cdn.com/inductiveautomation/original/2X/a/a14836dd4887ad071e6c35bd01cd42429bc0a653.txt) (189.3 KB)

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 7, 2019, 12:07pm UTC](https://forum.inductiveautomation.com/t/gateway-thread-deadlock-detected/24718/2 "2019-05-07T12:07:05Z")

</div>

Thanks, this looks like the same deadlock. We found out yesterday it wasn’t actually fixed in any of the nighty or rc’s due to a build issue. It’s going to be fixed in the 8.0.1 final release.

---

<div class="post-metadata">

**Author:** ![ASF](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@ASF](https://forum.inductiveautomation.com/u/ASF)\
**Post date:** [May 7, 2019, 10:12pm UTC](https://forum.inductiveautomation.com/t/gateway-thread-deadlock-detected/24718/3 "2019-05-07T22:12:24Z")

</div>

Thanks. Will I be able to install the 8.0.1 final build over the top of the 8.0.2 nightly? Or will I be able to do an export/import?

Is there a release date for the 8.0.1 final yet, or still up in the air?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 7, 2019, 10:14pm UTC](https://forum.inductiveautomation.com/t/gateway-thread-deadlock-detected/24718/4 "2019-05-07T22:14:19Z")

</div>

8.0.1 was released this afternoon. I don’t know about installing on top of the nightly, that’s a good question…