# Gauge component from 7.3 webinar

**URL:** <https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413>\
**Category:** Ignition\
**Created:** [October 11, 2011, 6:16pm UTC](https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413 "2011-10-11T18:16:11Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [October 11, 2011, 6:16pm UTC](https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413/1 "2011-10-11T18:16:11Z")

</div>

As promised during the [7.3 release webinar](http://www.youtube.com/watch?v=kvrwjs6eDww), here is an exported custom palette that has the Gauge component that I showed.

I’ll be recording a screencast of myself creating a similar gauge and put it up on YouTube so you can all see the various “tricks” used to create a component like this.  
[gauge\_palette.vpal](https://us1.discourse-cdn.com/inductiveautomation/original/1X/4ae1aecb0ac11956130e725e2fd2d0cbf6582bab.vpal) (11.4 KB)

---

<div class="post-metadata">

**Author:** ![DennisWomack](https://avatars.discourse-cdn.com/v4/letter/d/51bf81/32.png) [@DennisWomack](https://forum.inductiveautomation.com/u/DennisWomack)\
**Post date:** [October 11, 2011, 9:47pm UTC](https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413/2 "2011-10-11T21:47:10Z")

</div>

Thanks for posting, Carl.

I downloaded the .wmv and watched it.

You guys should have said who you were in the picture.

Dennis

---

<div class="post-metadata">

**Author:** ![focus-eng](https://avatars.discourse-cdn.com/v4/letter/f/fbc32d/32.png) [@focus-eng](https://forum.inductiveautomation.com/u/focus-eng)\
**Post date:** [October 28, 2011, 9:40pm UTC](https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413/3 "2011-10-28T21:40:35Z")

</div>

Any update on the screencast, cheers.

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [October 28, 2011, 9:43pm UTC](https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413/4 "2011-10-28T21:43:32Z")

</div>

You can watch the video here:

[youtube.com/watch?v=kvrwjs6eDww](http://www.youtube.com/watch?v=kvrwjs6eDww)

---

<div class="post-metadata">

**Author:** ![focus-eng](https://avatars.discourse-cdn.com/v4/letter/f/fbc32d/32.png) [@focus-eng](https://forum.inductiveautomation.com/u/focus-eng)\
**Post date:** [October 28, 2011, 10:04pm UTC](https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413/5 "2011-10-28T22:04:50Z")

</div>

Hi Travis,

I have seen that one.

I meant the one that they mention in it were one could see how a Custom pallete component is being made. i.e.  
how to make the Gauge component.

Sorry if this is a stupid question to ask.

Regards  
Sascha

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [October 28, 2011, 10:34pm UTC](https://forum.inductiveautomation.com/t/gauge-component-from-7-3-webinar/3413/6 "2011-10-28T22:34:37Z")

</div>

Ah right, we haven’t made that one yet. Hopefully soon.