# GE Fanuc VersaMax PLC

**URL:** <https://forum.inductiveautomation.com/t/ge-fanuc-versamax-plc/35735>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [June 17, 2020, 1:33am UTC](https://forum.inductiveautomation.com/t/ge-fanuc-versamax-plc/35735 "2020-06-17T01:33:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![valverde.anthony](https://avatars.discourse-cdn.com/v4/letter/v/278dde/32.png) [@valverde.anthony](https://forum.inductiveautomation.com/u/valverde.anthony)\
**Post date:** [June 17, 2020, 1:33am UTC](https://forum.inductiveautomation.com/t/ge-fanuc-versamax-plc/35735/1 "2020-06-17T01:33:29Z")

</div>

Hello, I am attempting to connect to a GE Fanuc VersaMax PLC using Modbus TCP/IP. I came across this thread [http://forum.inductiveautomation.com/t/ge-90-30-addressing-with-modbus-tcp-driver/10687](http://forum.inductiveautomation.com/t/ge-90-30-addressing-with-modbus-tcp-driver/10687) .

I had 2 questions:

1. Can I read Modbus registers from the VersaMax?
2. It seems everytime I use Ignition 7.9 and attempt to connect with Modbus, my device oscillates between “Connecting and Disconnecting”. Is there a known reason why?