# Get Value on Alarm Trigger Event

**URL:** <https://forum.inductiveautomation.com/t/get-value-on-alarm-trigger-event/115630>\
**Category:** Ignition\
**Created:** [May 20, 2026, 8:17pm UTC](https://forum.inductiveautomation.com/t/get-value-on-alarm-trigger-event/115630 "2026-05-20T20:17:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eugene49](https://avatars.discourse-cdn.com/v4/letter/e/c6cbf5/32.png) [@Eugene49](https://forum.inductiveautomation.com/u/Eugene49)\
**Post date:** [May 20, 2026, 8:17pm UTC](https://forum.inductiveautomation.com/t/get-value-on-alarm-trigger-event/115630/1 "2026-05-20T20:17:39Z")

</div>

This is weird, on status table, i want to show the 'value' that triggered the alarm.

But The table shows the value that triggered the alarm, when the alarm was cleared it will show the value when it was cleared.

Is there a way to get the value at which alarm occured and display it on table -- that is on Active event value?

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/4/443b0058df5d3a5330d37479326c31c591516b5b.png)