# Getting CIP Data (CPU Utilisation N Temperature from a Stratix

**URL:** <https://forum.inductiveautomation.com/t/getting-cip-data-cpu-utilisation-n-temperature-from-a-stratix/86329>\
**Category:** Ignition\
**Created:** [February 25, 2024, 9:09pm UTC](https://forum.inductiveautomation.com/t/getting-cip-data-cpu-utilisation-n-temperature-from-a-stratix/86329 "2024-02-25T21:09:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jean-Marc\_Bissonnett](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@Jean-Marc\_Bissonnett](https://forum.inductiveautomation.com/u/Jean-Marc_Bissonnett)\
**Post date:** [February 25, 2024, 9:09pm UTC](https://forum.inductiveautomation.com/t/getting-cip-data-cpu-utilisation-n-temperature-from-a-stratix/86329/1 "2024-02-25T21:09:11Z")

</div>

Hello everyone, I would like to know if there is a way trough Ignition to get CIP data from a Stratix 5700 and copy it back into a tag of a CLX.  
I have the stratix in my modules tree, but the temperature and CPU utilisation are not there, but Rockwell documentation shows they are availabe through CIP.

The goal is the have a Dashboard of all my stratix including, Stratix and panel temperature.

Thank you,

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [February 25, 2024, 11:06pm UTC](https://forum.inductiveautomation.com/t/getting-cip-data-cpu-utilisation-n-temperature-from-a-stratix/86329/2 "2024-02-25T23:06:21Z")

</div>

The ControlLogix processor should be able to message the Stratix to extract anything else that's available that you want. And that is the most robust approach.

---

<div class="post-metadata">

**Author:** ![Jean-Marc\_Bissonnett](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@Jean-Marc\_Bissonnett](https://forum.inductiveautomation.com/u/Jean-Marc_Bissonnett)\
**Post date:** [February 25, 2024, 11:29pm UTC](https://forum.inductiveautomation.com/t/getting-cip-data-cpu-utilisation-n-temperature-from-a-stratix/86329/3 "2024-02-25T23:29:06Z")

</div>

Thank you, I'll look it up.

---

<div class="post-metadata">

**Author:** ![Jean-Marc\_Bissonnett](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@Jean-Marc\_Bissonnett](https://forum.inductiveautomation.com/u/Jean-Marc_Bissonnett)\
**Post date:** [February 26, 2024, 12:47am UTC](https://forum.inductiveautomation.com/t/getting-cip-data-cpu-utilisation-n-temperature-from-a-stratix/86329/4 "2024-02-26T00:47:20Z")

</div>

Found out what I needed on Rockwell forum. Using the EDS file, you can configure a message for the data you want.  
Thanks again @pturmel