# "gwcmd" command in powershell not found

**URL:** <https://forum.inductiveautomation.com/t/gwcmd-command-in-powershell-not-found/70282>\
**Category:** Ignition\
**Created:** [February 24, 2023, 1:50pm UTC](https://forum.inductiveautomation.com/t/gwcmd-command-in-powershell-not-found/70282 "2023-02-24T13:50:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Emile\_Laplante](https://avatars.discourse-cdn.com/v4/letter/e/c57346/32.png) [@Emile\_Laplante](https://forum.inductiveautomation.com/u/Emile_Laplante)\
**Post date:** [February 24, 2023, 1:50pm UTC](https://forum.inductiveautomation.com/t/gwcmd-command-in-powershell-not-found/70282/1 "2023-02-24T13:50:35Z")

</div>

Hi,

When I try the "gwcmd" command in power shell on windows, I get a "command not found":

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/e/8eb9ab0671f7635e5512f0d4964c2309fa963dce.png)

However, the command works fine in windows cmd.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/e/5e43a723ad34a0fbad1591388b0aae4a0253924b.png)

What is the issue?

Thank you!

---

<div class="post-metadata">

**Author:** ![bschroeder](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bschroeder/32/13260_2.png) [@bschroeder](https://forum.inductiveautomation.com/u/bschroeder)\
**Post date:** [February 24, 2023, 1:53pm UTC](https://forum.inductiveautomation.com/t/gwcmd-command-in-powershell-not-found/70282/2 "2023-02-24T13:53:32Z")

</div>

Try .\gwcmd -h

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/d/6d233e4f76187c3160ddd1cf5c646701bc4eab59.png)