# Hanwha QNV-8080R cant figure out the URL for the IP camera viewer **URL:** \ **Category:** Ignition\ **Tags:** ignition81\ **Created:** [January 9, 2024, 4:28pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978 "2024-01-09T16:28:15Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Christopher\_Lang](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/christopher_lang/32/55614_2.png) [@Christopher\_Lang](https://forum.inductiveautomation.com/u/Christopher_Lang)\ **Post date:** [January 9, 2024, 4:28pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/1 "2024-01-09T16:28:15Z")
hanwha QNV-8080R I need help on the url needed to put this on the ip camera viewer ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [January 9, 2024, 5:00pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/2 "2024-01-09T17:00:31Z")
Add a link to the device user manual. It should be in there. ---
**Author:** ![Christopher\_Lang](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/christopher_lang/32/55614_2.png) [@Christopher\_Lang](https://forum.inductiveautomation.com/u/Christopher_Lang)\ **Post date:** [January 9, 2024, 5:01pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/3 "2024-01-09T17:01:21Z")
[datasheet\_qnv-8080r\_190527.pdf](https://forum.inductiveautomation.com/uploads/short-url/abU6YNmwISt1N0NqLkgwclkylXm.pdf) (606.4 KB) ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [January 9, 2024, 5:10pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/4 "2024-01-09T17:10:11Z")
That's the datasheet. You need the user manual. ---
**Author:** ![Felipe\_CRM](https://avatars.discourse-cdn.com/v4/letter/f/dfb087/32.png) [@Felipe\_CRM](https://forum.inductiveautomation.com/u/Felipe_CRM)\ **Post date:** [January 9, 2024, 6:01pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/5 "2024-01-09T18:01:35Z")
Manual is too large to upload here but can be downloaded from this page: > **[QNV-8080R](https://hanwhavisionamerica.com/product/qnv-8080r/)** > > 5 MP Network IR Vandal Resistant Dome Camera with Varifocal Lens It appears to be just `http://ip:port`, default VNP port is `4520`, but there's other setups depending on how the camera is connected. ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [January 9, 2024, 7:04pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/6 "2024-01-09T19:04:58Z")
Can you browse to it with your web browser? > By factory default, the IP address will be assigned from the DHCP server automatically. > If there is no DHCP server available, the IP address will be set to 192.168.1.100. > To change the IP address, use the IP Installer. > For further details on IP Installer use, refer to “Static IP Setup”. (Page 25) Manual link: [https://hanwhavisionamerica.com/download/17683/?tmstv=1704826808](https://hanwhavisionamerica.com/download/17683/?tmstv=1704826808) ---
**Author:** ![Christopher\_Lang](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/christopher_lang/32/55614_2.png) [@Christopher\_Lang](https://forum.inductiveautomation.com/u/Christopher_Lang)\ **Post date:** [January 9, 2024, 7:11pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/7 "2024-01-09T19:11:36Z")
there is already an IP set up and its working I just cant get it displaying on ignition Using [http://10.194.46.190:80](http://10.194.46.190:80) dint work either. Its giving me an IO:Exception stream is not a Mjpeg stream I checked the settings on the camera though and is set for Mjpeg ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [January 9, 2024, 7:25pm UTC](https://forum.inductiveautomation.com/t/hanwha-qnv-8080r-cant-figure-out-the-url-for-the-ip-camera-viewer/83978/8 "2024-01-09T19:25:32Z")
OK, but you're dribbling out bits of information here that should have all been in the original post. I'm giving up, I'm afraid.