# Has any one used a Moxa MGate MB3180

**URL:** <https://forum.inductiveautomation.com/t/has-any-one-used-a-moxa-mgate-mb3180/2578>\
**Category:** Ignition\
**Created:** [January 28, 2011, 8:04pm UTC](https://forum.inductiveautomation.com/t/has-any-one-used-a-moxa-mgate-mb3180/2578 "2011-01-28T20:04:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DougA](https://avatars.discourse-cdn.com/v4/letter/d/eada6e/32.png) [@DougA](https://forum.inductiveautomation.com/u/DougA)\
**Post date:** [January 28, 2011, 8:04pm UTC](https://forum.inductiveautomation.com/t/has-any-one-used-a-moxa-mgate-mb3180/2578/1 "2011-01-28T20:04:03Z")

</div>

I was thinking about using it with an Automation Direct Koyo Click PLC.

Has any one managed to use a Click PLC with the UA Modbus device driver in IAs Ignition Gateway?

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [February 2, 2011, 1:44am UTC](https://forum.inductiveautomation.com/t/has-any-one-used-a-moxa-mgate-mb3180/2578/2 "2011-02-02T01:44:07Z")

</div>

I know that we’ve used the MB3170, but I’m not sure what the difference is between that and the 3180.

Regards,

---

<div class="post-metadata">

**Author:** ![DougA](https://avatars.discourse-cdn.com/v4/letter/d/eada6e/32.png) [@DougA](https://forum.inductiveautomation.com/u/DougA)\
**Post date:** [February 2, 2011, 8:42pm UTC](https://forum.inductiveautomation.com/t/has-any-one-used-a-moxa-mgate-mb3180/2578/3 "2011-02-02T20:42:12Z")

</div>

Thanks I will was looking at both and wasn’t clear to me either.