# Has anyone used this third-party BASP driver module?

**URL:** <https://forum.inductiveautomation.com/t/has-anyone-used-this-third-party-basp-driver-module/71742>\
**Category:** Ignition\
**Created:** [March 28, 2023, 10:33pm UTC](https://forum.inductiveautomation.com/t/has-anyone-used-this-third-party-basp-driver-module/71742 "2023-03-28T22:33:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ryan\_Allen](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ryan_allen/32/47013_2.png) [@Ryan\_Allen](https://forum.inductiveautomation.com/u/Ryan_Allen)\
**Post date:** [March 28, 2023, 10:33pm UTC](https://forum.inductiveautomation.com/t/has-anyone-used-this-third-party-basp-driver-module/71742/1 "2023-03-28T22:33:43Z")

</div>

Found an integrator named Crucial Controls that appears to freely share the module they developed to directly interface with Control Wave PLCs. (BSAP for anyone searching for this later)

Module:

> **[Crucial Controls](https://crucialcontrols.ca/bsap.html)**
>
> Bristol BSAP Driver for use in Inductive Automation Ignition. Communicate to ControlWave RTU's.

Does anyone have first-hand experience using it? Is there anything I should be wary of if I decide to try it? Looks like testing was done on v7.9, but I'd be using v8.1. Is that a dealbreaker in and of itself?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [March 28, 2023, 10:38pm UTC](https://forum.inductiveautomation.com/t/has-anyone-used-this-third-party-basp-driver-module/71742/2 "2023-03-28T22:38:44Z")

</div>

> [@Ryan\_Allen](#):
>
> Looks like testing was done on v7.9, but I'd be using v8.1. Is that a dealbreaker in and of itself?

It is a dealbreaker if they don't offer a module specifically built for 8.1, tested or not.