# Having trouble connecting to Ignition through NAT

**URL:** <https://forum.inductiveautomation.com/t/having-trouble-connecting-to-ignition-through-nat/12210>\
**Category:** Archived Topics\
**Created:** [October 6, 2016, 10:24pm UTC](https://forum.inductiveautomation.com/t/having-trouble-connecting-to-ignition-through-nat/12210 "2016-10-06T22:24:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hazmat480](https://avatars.discourse-cdn.com/v4/letter/h/97f17d/32.png) [@Hazmat480](https://forum.inductiveautomation.com/u/Hazmat480)\
**Post date:** [October 6, 2016, 10:24pm UTC](https://forum.inductiveautomation.com/t/having-trouble-connecting-to-ignition-through-nat/12210/1 "2016-10-06T22:24:30Z")

</div>

I have a Cisco ASA that I am using to NAT between two networks to the Ignition gateway. The connection completes as far as I can tell in the ASA, the Ignition client splash screen opens and says connecting then timesout. Any suggestions? Thanks.