# Help With A-B Connection Path **URL:** \ **Category:** Ignition\ **Created:** [October 25, 2019, 1:34pm UTC](https://forum.inductiveautomation.com/t/help-with-a-b-connection-path/29396 "2019-10-25T13:34:27Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![ClemsonTim80](https://avatars.discourse-cdn.com/v4/letter/c/edb3f5/32.png) [@ClemsonTim80](https://forum.inductiveautomation.com/u/ClemsonTim80)\ **Post date:** [October 25, 2019, 1:34pm UTC](https://forum.inductiveautomation.com/t/help-with-a-b-connection-path/29396/1 "2019-10-25T13:34:27Z")
Trying to setup connection path to a DH+ based SLC 5/04 Processor At Node 6 by going through a ControlLogix at 192.53.3.30 using 1756-DHRIO/D Channel B in slot 9 Selecting A-B SLC Driver and current path that is not working is 192.53.3.30,1,9,3,6 I tried setting up just a connection to ControlLogix processor at 192.53.3.30 only and it works fine. We can see the SLC from RS-LINX at the facility. Ignition7.9.12 Thanks In Advance ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [October 25, 2019, 1:43pm UTC](https://forum.inductiveautomation.com/t/help-with-a-b-connection-path/29396/2 "2019-10-25T13:43:08Z")
Remove 192.53.3.30 from the connection path, just use it as the hostname. The connection path would then be `1,9,3,6`. If your connection path ever has an odd number of components you’ve built it incorrectly. ---
**Author:** ![ClemsonTim80](https://avatars.discourse-cdn.com/v4/letter/c/edb3f5/32.png) [@ClemsonTim80](https://forum.inductiveautomation.com/u/ClemsonTim80)\ **Post date:** [October 25, 2019, 1:45pm UTC](https://forum.inductiveautomation.com/t/help-with-a-b-connection-path/29396/3 "2019-10-25T13:45:59Z")
You again are the man Kevin ! Be glad when this DH+ stuff is gone …