# Help with Kepware **URL:** \ **Category:** General Discussion\ **Created:** [June 14, 2023, 6:37am UTC](https://forum.inductiveautomation.com/t/help-with-kepware/75034 "2023-06-14T06:37:48Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![kavya\_shree](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@kavya\_shree](https://forum.inductiveautomation.com/u/kavya_shree)\ **Post date:** [June 14, 2023, 6:37am UTC](https://forum.inductiveautomation.com/t/help-with-kepware/75034/1 "2023-06-14T06:37:48Z")
Hi, Just I have started the same. I have connected Kepware to Ignition. Now I need How to create tags in Kepware. how tags need to fetch in Ignition. In Ignition I have connected the machines to Allen Bradley PLC. so how tags can be fetch from kepware. ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [June 14, 2023, 8:13am UTC](https://forum.inductiveautomation.com/t/help-with-kepware/75034/2 "2023-06-14T08:13:06Z")
> [@kavya\_shree](#): > > How to create tags in Kepware. That will be explained in the Kepware documentation. It really isn't a question for the Ignition forum. > [@kavya\_shree](#): > > In Ignition I have connected the machines to Allen Bradley PLC. so how tags can be fetch from kepware. Ignition comes with Allen-Bradley OPC drivers so you can read tags directly from the PLC. Why do you think you need to "fetch from Kepware"? ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [June 14, 2023, 8:36am UTC](https://forum.inductiveautomation.com/t/help-with-kepware/75034/3 "2023-06-14T08:36:49Z")
I'm not sure what your question has to do with the OP? Other than being about the same opc UA server, kepware. I've marked as off topic, as I don't have the super powers to split it off ---
**Author:** ![martinel3746](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@martinel3746](https://forum.inductiveautomation.com/u/martinel3746)\ **Post date:** [June 14, 2023, 5:33pm UTC](https://forum.inductiveautomation.com/t/help-with-kepware/75034/4 "2023-06-14T17:33:41Z")
> [@Transistor](#): > > Ignition comes with Allen-Bradley OPC drivers so you can read tags directly from the PLC. I would eliminate Kepware. It is an extra point of failure, configuration and maintenance that you don't need. ---
**Author:** ![kavya\_shree](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@kavya\_shree](https://forum.inductiveautomation.com/u/kavya_shree)\ **Post date:** [June 15, 2023, 6:59am UTC](https://forum.inductiveautomation.com/t/help-with-kepware/75034/5 "2023-06-15T06:59:09Z")
thank you all, I got the connection. I enabled YES for below options in Project Property ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/5/056aef6f5c72e6361caf2dcca51afb97d46726c1.png) ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/b/2b2f7cd32e086d50034d6c8bc9208f0c42644a3d.png) after this I got connection. ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [June 15, 2023, 7:20am UTC](https://forum.inductiveautomation.com/t/help-with-kepware/75034/6 "2023-06-15T07:20:25Z")
Care to share the solution? Someone searching the forum and finding this topic will be in exactly the same state they were in before reading it i.e. still looking for a solution