# Hide date range easy chart

**URL:** <https://forum.inductiveautomation.com/t/hide-date-range-easy-chart/3505>\
**Category:** Ignition\
**Created:** [October 27, 2011, 9:12am UTC](https://forum.inductiveautomation.com/t/hide-date-range-easy-chart/3505 "2011-10-27T09:12:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SamJaimes](https://avatars.discourse-cdn.com/v4/letter/s/a6a055/32.png) [@SamJaimes](https://forum.inductiveautomation.com/u/SamJaimes)\
**Post date:** [October 27, 2011, 9:12am UTC](https://forum.inductiveautomation.com/t/hide-date-range-easy-chart/3505/1 "2011-10-27T09:12:54Z")

</div>

Hello everybody,

I would like to know if there’s a way to hide date range selectors from easy chart.

Thanks!

Sam

---

<div class="post-metadata">

**Author:** ![nathan](https://avatars.discourse-cdn.com/v4/letter/n/c5a1d2/32.png) [@nathan](https://forum.inductiveautomation.com/u/nathan)\
**Post date:** [October 27, 2011, 12:00pm UTC](https://forum.inductiveautomation.com/t/hide-date-range-easy-chart/3505/2 "2011-10-27T12:00:19Z")

</div>

Sure, change the chart mode to manual. You will need to set the Start Date and End Date manually. Feel free to bind these properties to other components, expressions, or queries.

More info on the Easy Chart in the component section of the manual [here](http://inductiveautomation.com/support/usermanuals/ignition/charts_pmieasychart.htm).

---

<div class="post-metadata">

**Author:** ![SamJaimes](https://avatars.discourse-cdn.com/v4/letter/s/a6a055/32.png) [@SamJaimes](https://forum.inductiveautomation.com/u/SamJaimes)\
**Post date:** [October 28, 2011, 11:04am UTC](https://forum.inductiveautomation.com/t/hide-date-range-easy-chart/3505/3 "2011-10-28T11:04:11Z")

</div>

Thanks, very helpful!