# High and low settings for a cylindrical tank?

**URL:** <https://forum.inductiveautomation.com/t/high-and-low-settings-for-a-cylindrical-tank/46570>\
**Category:** Ignition\
**Created:** [May 11, 2021, 11:29am UTC](https://forum.inductiveautomation.com/t/high-and-low-settings-for-a-cylindrical-tank/46570 "2021-05-11T11:29:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tom.roberts](https://avatars.discourse-cdn.com/v4/letter/t/48db29/32.png) [@Tom.roberts](https://forum.inductiveautomation.com/u/Tom.roberts)\
**Post date:** [May 11, 2021, 11:29am UTC](https://forum.inductiveautomation.com/t/high-and-low-settings-for-a-cylindrical-tank/46570/1 "2021-05-11T11:29:22Z")

</div>

In perspective I know I can set warning threshhold, but how would I go about doing that for a high and low on a cylindrical tank?

Thanks!

---

<div class="post-metadata">

**Author:** ![matthew.ayre](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matthew.ayre/32/19499_2.png) [@matthew.ayre](https://forum.inductiveautomation.com/u/matthew.ayre)\
**Post date:** [May 11, 2021, 11:51am UTC](https://forum.inductiveautomation.com/t/high-and-low-settings-for-a-cylindrical-tank/46570/2 "2021-05-11T11:51:04Z")

</div>

Welcome @Tom.roberts, you could have a binding on the liquidColor property based on an expression that compares the current level against the high/low level.

Edit: this is assuming you are using the vessel symbol, forgot to ask that part 😅

---

<div class="post-metadata">

**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\
**Post date:** [May 11, 2021, 2:23pm UTC](https://forum.inductiveautomation.com/t/high-and-low-settings-for-a-cylindrical-tank/46570/3 "2021-05-11T14:23:08Z")

</div>

@matthew.ayre is correct. The warning threshold is sort of a way to set up a quick color difference, but if you have several thresholds that make sense, then you should set up a binding for the color which is driven by the value of the tank. Attach a Map transform to this binding and you can then set as many thresholds as you’d like.

---

<div class="post-metadata">

**Author:** ![Tom.roberts](https://avatars.discourse-cdn.com/v4/letter/t/48db29/32.png) [@Tom.roberts](https://forum.inductiveautomation.com/u/Tom.roberts)\
**Post date:** [May 11, 2021, 3:56pm UTC](https://forum.inductiveautomation.com/t/high-and-low-settings-for-a-cylindrical-tank/46570/4 "2021-05-11T15:56:21Z")

</div>

That worked perfectly! Thanks guys!