# Highest Active Alarm Name

**URL:** <https://forum.inductiveautomation.com/t/highest-active-alarm-name/36412>\
**Category:** Ignition\
**Created:** [July 7, 2020, 12:39am UTC](https://forum.inductiveautomation.com/t/highest-active-alarm-name/36412 "2020-07-07T00:39:41Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![mazeyrat](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mazeyrat/32/10955_2.png) [@mazeyrat](https://forum.inductiveautomation.com/u/mazeyrat)\
**Post date:** [July 7, 2020, 4:14am UTC](https://forum.inductiveautomation.com/t/highest-active-alarm-name/36412/2 "2020-07-07T04:14:44Z")

</div>

I seem s to be the same bug

> [@\[BUG\] Ignition 8.0.14 - alarms properties are not all updated](http://forum.inductiveautomation.com/t/bug-ignition-8-0-14-alarms-properties-are-not-all-updated/36397):
>
> Ignition 8.0.14 @ggross I have a tag with an alarm. When the alarm is Active, IsActive propertie of the alarm is ok but all properties Alarms.\* for the tag are not updated, (see “Défaut.IsActive”) see example: As a side note, if a disable/enable the alarm, properties are then updated

---

_[View the full topic](https://forum.inductiveautomation.com/t/highest-active-alarm-name/36412)._