# How fast does "leased" tag time take effect **URL:** \ **Category:** Ignition Early Access\ **Created:** [May 21, 2020, 1:59pm UTC](https://forum.inductiveautomation.com/t/how-fast-does-leased-tag-time-take-effect/34936 "2020-05-21T13:59:44Z")\ **Posts on this page:** 1\ **Showing post:** 13
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [May 16, 2025, 1:05am UTC](https://forum.inductiveautomation.com/t/how-fast-does-leased-tag-time-take-effect/34936/13 "2025-05-16T01:05:38Z")
> [@Chris\_Bingham](#): > > to a different problem entirely No, known pathological OPC client behavior. > [@Leased Tag Slow Rate Switching](https://forum.inductiveautomation.com/t/leased-tag-slow-rate-switching/46319): > > Hello Everyone, On my gateway, I have noticed that leased tags take an excessive amount time to switch from their slow mode to fast mode once they are needed initially (10-60s). I am using a slow rate of 30,000 ms and a fast rate of 1,000 ms. The test that I am doing is as follows: open a popup window that contains a tag binding for a leased tag, toggle the state of the tag in the PLC and observe how long it takes to update. Once it updates, I toggle the state again to see if it is starting to… If there is _ **any** _ enabled OPC tag that yields unknown node, subscription changes are batched every 8 seconds. --- _[View the full topic](https://forum.inductiveautomation.com/t/how-fast-does-leased-tag-time-take-effect/34936)._